Free fall from 600 Meters

Hello,

Yesterday I had a crash, my Quadro falls down from 600 meters. :(

I fly with this copter many hours, never any Problem.

 

Spektrum DX8 with Satelite

UBec for APM

APM 2.0 Firmware 2.7.3

uBlox LEA-6

 

 

 

I analyzed the log file and see I had signale lose (throttle failsafe was enabled) and the APM2 turn on the RTL Mode, but after few seconds Turn Off the Motors? Why?

 

Maybee a Bug?

 

 

 

2012-10-13 19-19 4.log

2012-10-13 19-19 4.kmz

Crash Log.png

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Hi Silvio,

    It looks like the APM rebooted.

    There's 5 minutes missing from the GPS log, plus a lot of stuff that looks like a re-boot, right during your crash.

    It would be good if you could turn on your motors for logging, it's easier to see what's going on.

    Here's the area of your log where the reboot happens.  Notice the GPS time:

    It changes from 576934400 to 577243000, which is in milliseconds from 00:00:00, Universal Time.

    There is a lot of reboot stuff between these two GPS readings.

    Dan Gray

    GPS, 576934200, 9, 46.3116441, 7.7718227, 601.8300, 1214.1400, 329, 11325
    NTUN, 6969, 293, 0, 0, -75, -850, 271, -114, 0, 0
    CTUN, 0, 0, -5356, -5401, -1, 6, -19, 509, 0, 0
    ATT, 0, -432, -1112, -599, 0, 23755, 24046, 0, 0
    CTUN, 0, 0, -5358, -5401, 0, 3, -20, 507, 0, 0
    ATT, 0, 322, -1112, -184, 0, 23674, 24046, 0, 0
    GPS, 576934400, 9, 46.3116419, 7.7718306, 601.7800, 1214.1400, 323, 11249
    NTUN, 7024, 293, 0, 0, -75, -850, 271, -109, 0, 0
    CTUN, 0, 0, -5360, -5401, 1, 1, -20, 506, 0, 0
    ATT, 0, -766, -1112, -193, 0, 23731, 24046, 0, 0
    MOD:STABILIZE, 503
    PM, 0, 0, 0, 61
    MOD:STABILIZE, 503
    MOD:STABILIZE, 503
    PM, 0, 0, 0, 60
    MOD:STABILIZE, 503
    PM, 0, 0, 0, 59
    PM, 0, 0, 0, 58
    PM, 0, 0, 0, 60
    PM, 0, 0, 0, 61
    PM, 0, 0, 0, 60
    PM, 0, 0, 0, 61
    PM, 0, 0, 0, 60
    PM, 0, 0, 0, 60
    PM, 0, 0, 0, 60
    PM, 0, 0, 0, 60
    PM, 0, 0, 0, 61
    PM, 0, 0, 0, 60
    PM, 0, 0, 0, 60
    PM, 0, 0, 0, 60
    PM, 0, 0, 0, 61
    PM, 0, 0, 0, 60
    PM, 0, 0, 0, 60
    PM, 0, 0, 0, 60
    MOD:STABILIZE, 503
    MOD:STABILIZE, 503
    MOD:STABILIZE, 503
    PM, 0, 0, 0, 61
    PM, 0, 0, 0, 60
    PM, 0, 0, 0, 60
    PM, 0, 0, 0, 60
    PM, 0, 0, 0, 60
    CMD, 9, 0, 16, 0, 0, 0, 463116531, 77739981
    NTUN, 4, 348, 0, 0, -75, -850, 0, 0, 0, 0
    CTUN, 0, 0, 74, 0, 0, 10, -76, 0, 0, 0
    ATT, 0, -76, 0, 1116, 4461, 18910, 18808, 0, 0
    CTUN, 0, 0, 58, 0, 0, 10, -118, 0, 0, 0
    ATT, 0, -76, 0, 1116, 4461, 18908, 18808, 0, 0
    NTUN, 31, 226, 0, 0, -75, -850, 12, 9, 0, 0
    CTUN, 0, 0, 39, 0, 0, 10, -154, 0, 0, 0
    ATT, 0, -76, 0, 1116, 4474, 18906, 18808, 0, 0
    CTUN, 0, 0, 22, 0, 0, 10, -162, 0, 0, 0
    ATT, 0, -77, 0, 1116, 4461, 18904, 18808, 0, 0
    NTUN, 18, 16, 0, 0, -75, -850, 0, -4, 0, 0
    CTUN, 0, 0, 5, 0, 0, 10, -166, 0, 0, 0
    ATT, 0, -77, 0, 1116, 4029, 18902, 18808, 0, 0
    CTUN, 0, 0, 4, 0, 0, 10, -88, 0, 0, 0
    ATT, 0, -77, 0, 1116, 2720, 18899, 18808, 0, 0
    MOD:STABILIZE, 487
    GPS, 577243000, 9, 46.3116532, 7.7739986, -0.0200, 635.8600, 0, 1028
    NTUN, 6, 215, 0, 0, -75, -850, 0, 0, 0, 0
    CTUN, 0, 0, 2, 0, 0, 10, -54, 0, 0, 0
    ATT, 0, -78, 0, 1116, 254, 18896, 18808, 0, 0
    CTUN, 0, 0, 1, 0, 0, 10, -32, 0, 0, 0
    ATT, 0, -79, 0, 1116, 0, 18893, 18893, 0, 0
    GPS, 577243200, 9, 46.3116532, 7.7739986, -0.0100, 635.8600, 1, 1028

  • Looks still good for a 600m Crash? ;)

    3692525714?profile=original

  • :(

This reply was deleted.

Activity

DIY Robocars via Twitter
Jan 28
DIY Robocars via Twitter
RT @Heavy02011: ⁦@diyrobocars⁩ : A Home-brew computer club* for Connected Autonomous Driving. talk at #piandmore ⁦@PiAndMore⁩ on Jan 23rd h…
Jan 23
DIY Robocars via Twitter
RT @a1k0n: New blog post! Deep dive into my ceiling light based localization algorithm which runs in 1ms on a Raspberry Pi 3: https://t.co/…
Jan 23
DIY Robocars via Twitter
Great new guide to using @donkey_car https://custom-build-robots.com/donkey-car-e-book-en
Jan 23
DIY Robocars via Twitter
RT @chr1sa: The next @DIYRobocars virtual AI race is tomorrow morn at 9:00am PT. You can watch live on Twitch https://www.meetup.com/DIYRobocars/events/275268196/
Jan 22
DIY Robocars via Twitter
New version of Intel OpenBot! This resolves many of the issues with the first version, including a much smoother tr… https://twitter.com/i/web/status/1352395636369313798
Jan 21
DIY Drones via Twitter
Using ArduRover with an RTK GPS https://ift.tt/2N9I3RO
Jan 18
DIY Drones via Twitter
Jan 18
DIY Robocars via Twitter
Jan 18
DIY Robocars via Twitter
Jan 15
DIY Robocars via Twitter
Jan 15
DIY Drones via Twitter
Jan 14
DIY Robocars via Twitter
RT @Heavy02011: @diyrobocars : A Home-brew computer club* for Connected Autonomous Driving on Jan 23rd, 2021 https://www.meetup.com/Connected-Autonomous-Driving/events/275728684/ #Meetu…
Jan 14
DIY Robocars via Twitter
Jan 14
DIY Robocars via Twitter
RT @Heavy02011: ⁦@diyrobocars⁩ Autonomous Driving Assembly at #rC3. join us at https://rc3.world/rc3/assembly/diyrobocars-f1tenth/ ⁦@f1tenth⁩ ⁦@DAVGtech⁩ ⁦@DWalmroth⁩…
Jan 11
DIY Robocars via Twitter
RT @chr1sa: New car designs coming for our next @DIYRobocars @donkey_car virtual race on the 23rd. Choose any one you want at race time Le…
Jan 11
More…