Heavy Lift (20-60Kg) Frames ... who has one?

Over the last three years I have been monitoring the web for evidence of large, heavy lift, commercially capable systems, for loads in excess of 10Kg


As many of you may know, there are a lack of larger frames on the market, that can handle more than 10Kg.


Rimcopters can manage 40Kg loads, and more!!!


From my research, I have found that many "heavy lift" frames are lacking one thing or the other. Either they are too heavy, or they are not strong enough. In both cases the frames are made using "tube and plate" style assemblies.


Three years ago I began developing a new type of multirotor frame. The basic idea came from my experiments with Aluminum extruded tubing as a core frame...bike rims.


This may sound quaint, perhaps even a bit tacky...bike rims for Commercial sUAS and UAV's...


I admit, its easy to get the wrong idea... I am not out in the dump collecting old bike parts to make recycled cheap frames! Stick with me for a bit, and discover why I kept going with this idea, and where I ended up :)


First, let me say that I am not here to bash anyone... There are millions of dollars invested into various manufactured designs, and those dollars are worth protecting!


It is not my desire to obliterate others hard work! My goal here is simple  : make the best multirotor possible ! The fact that what I have made is less expensive, and easy to buy and build... That it is made entirely of stock components... And can be reproduced in any part of the world may be concerning to some... I am only here to show that what I have made has value, is useful, and may help some of you in your goals.


Please, if you are offended, or don't have anything useful to add... Please refrain from offering any comments!


If you are an operator, and individual or company that see's value in the work, please contribute !!!


I do not sell frames, or systems... I learned that lesson!


I do not have a business, nor do I intend to create one... So relax!  Just enjoy the ride, and take from it what you can... If you intend to take this idea, and make a business... Beware ! I will not tolerate it, and ultimately, it would be better to just ask me to use the design, and pay for that use.


Individuals, who would like to reproduce my results may do so, for their own use... Make one, use it, and prosper!  However, if you intend to make them for commercial use... Please remember that this is my intellectual property... And I can and will protect it :)



Now, onto the good stuff



Rimcopter is a TYPE of multi rotor frame, not a brand. To be honest, I didn't even coin the phrase. The name simply denotes what it is... A multirotor made from bike rims.


WHY BIKE RIMS?


Thanks to 100+ yrs of production and development, the bike rim is lighter, stronger.. Less expensive than custom designed parts to do a similar job.


Tube and plate designs could never create the same strength to weight ratio's apparent in my designs, nor can the tube and plates adequately deal with Vibration and Deflection issues... The truth is, Tube and Plates could never be expected to hold the weight, and as a result of the design, they suffer from vibrations effects... Jello, lack of resolution, and over loaded flight controllers, trying desperately to over come the errors created due to motor deflections and stray vibrations!


Rimcopters are completely different. The flight controller and loads are completely isolated from the drive system. In addition, the strength to weight offered in the frame reduces the load to the motors substantially. The result is longer flights, with greater flight ability and performance... Without any complications from stray high frequency oscillations or motors moving all over the place...


When I say lighter, I mean MUCH lighter... In any given example, our frame design will be lighter. Sure, you can make a light tube and plate, however, it would never been strong enough to handle the loads!


AS an example, the 1000mm X8 Aluminum design, AUW of 1.2Kg including 30mm CF Landing gear (can take 200Lbs !!)


Y6 Carbon  900mm... 780g


In both cases the frames can take well over 150Lbs force, before ANY movement / deflection.


AS comparison, I can deflect the motors of a s900 with just two fingers... Less than 10Lbs force.


Too good to be true?


Not at all... The strength of this design is that ANYONE can produce one for them selves, and because of that, it is unlikely that any larger corporation will attempt to produce it.


So, you can see, its not marginally lighter... less than 1/2 the weight in many cases!

not slightly stronger... Exponentially stronger!


Not slightly less expensive... Frames can be made for as little as $75 - $150.


So then, what are you waiting for ?


Need a larger, stronger, less expensive frame ?


Of course you do!!!

What I can offer...Two formats ( X* and Y6 ) , in two sizes, from three materials ( carbon, aluminum or steel)

Welded, bonded, or bolted...

DSC02656.JPG

DSC02488.JPG

DSC02859.JPG

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

    • I was wondering when Vulcan would pipe up about this post... I spoke with Vulcan developer more than a year back. The Vulcan is definately one of the better tube and plates out there, however, it is no where near as strong, or as light.

      The real deal, rimcopter has exponentially less vibrations that arrive at the IMU. I am willing to prove this, I am also willing to demonstrate it to anyone, anytime they like.

      Tubes and plates... fancy tubes... thick plates... it all adds up to the smae thing : Rimcopters are lighter, stronger, produce less vibration, and are WAAAAAY less expensive to produce, distribute, own.

      • MR60

        I am interested in a comparison in vibrations between such a vulcan frame and one of yours. With hard data.

        • Me too!

          Trouble is, getting a Vulcan to test... At the same time, it would be great to have a Gryphon, a Skijib... any 1000mm + frame that is meant for larger loads, particularily loads that require sensitive IMU's.

          My assertion is that the Rimcopter will be able to produce a cleaner image / point cloud, with less expensive hardware.

          It would be a worthwhile project, to collect and test each of the contenders, and do an analysis of strenght, weight, cost, availibity.

          I would be more than willing to lend one or more of my existing systems to such an effort.

          • Thing is... I have little to lose in such a test... I have a few grand invested in my machines, $50K or so... I can only wonder what Vulcan has spent to get going... So, to be fair, I would understand if they were not so interested in a direct comparison.

            If I had millions at stake, I would simply ignore someone like me.... as long as possible :)

  • This copter is in development..

    28,000 watt..

    70 lb payload..

    2015-03-01 15.38.35.jpg

    https://storage.ning.com/topology/rest/1.0/file/get/3702106542?profile=original
    • What motors are this?

  • Well done.

    I have to wonder - the forces on the arms are almost entirely vertical (plus torsional). Sideways-forces must be relatively insignificant.

    Would there not be more efficiency gains to be had in principle, then, by (somehow) bracing the arms vertically rather than horizontally using the bike rims?  (using a vertical centre-pole above, perhaps)

    Also, I think, somewhere, I've seen 'ring-quads' (or octos) using an entire bike rim as the outer ring on which the motors are mounted.

    George

    • the torsional effect is the issue... vertical flex, if not associated with torsional deflection is fine.

      In this design, due to the way the rims are designed to clamp on the tube ( clincher) there is little flex or deflection whatsoever at all... this is mostly due to the short booms lenght.

      Tube and plates would need to make massive plates to cover the area ( think Ricopter) and that results in a a HEAVY frame, that still loads the FC with stray vibrations.

      The original rimcopter was a single rim... its a design shared by a few, including another member of this group.

      have a look at my original thread, from RCgroups:

      http://www.rcgroups.com/forums/showthread.php?t=2109318

      What I did with that design was make it more usefull... modular, scaleable... and so on.

  • Yes, by "quad" frame I meant four arms, but X8 of course.

    Unclear on what you offer. Full frame with center plates, motor mounts, landing gear, etc ... or just rims? Website?

This reply was deleted.

Activity

DIY Robocars via Twitter
Apr 27
DIY Robocars via Twitter
Apr 27
DIY Robocars via Twitter
RT @f1tenth: Sliding (autonomously) into the weekend like ... 🤖😎 #f1tenth #robots #AutonomousVehicles @OpenRoboticsOrg @NVIDIAEmbedded @Aut…
Apr 25
DIY Robocars via Twitter
RT @chr1sa: One of the problems with autonomous car racing is that watching software drive is not a very exciting spectator sport. To help…
Apr 25
DIY Robocars via Twitter
RT @SmallpixelCar: Replaced AGX Xavier with @NVIDIAEmbedded Jetson Xavier NX. Now both cars look fast and clean https://t.co/jlcoY2EjZf
Apr 25
DIY Robocars via Twitter
RT @chr1sa: Yesterday we had a record number of competitors (36) in our monthly @DIYRobocars virtual autonomous car race. We kept it going…
Apr 25
DIY Robocars via Twitter
Apr 16
DIY Drones via Twitter
RT @chr1sa: After more than a year of only virtual races, @DIYRobocars returns to the newly renovated @circuitlaunch on May 22 for the resu…
Apr 11
DIY Robocars via Twitter
RT @DAVGtech: And now available with LiDAR 🔥 https://twitter.com/Heavy02011/status/1381137016381964293
Apr 11
DIY Robocars via Twitter
RT @Heavy02011: #VirtualRaceLeague: @DIYRobocars Race #9 - #ParkingLotNerds #thunderhillracetrack, CA Join us for the next race April 24th,…
Apr 11
DIY Robocars via Twitter
RT @DWalmroth: Weather's finally cooperating, looking forward to racing 1:10 scale autonomous cars outdoors again! @diyrobocars, @NVIDIAEm…
Apr 7
DIY Robocars via Twitter
RT @AIDRI_: I finally succeeded in optimizing the trajectory and speed of a car on a #racetrack. Next step: implement a 2d controller and…
Apr 7
DIY Robocars via Twitter
@jetdillo @circuitlaunch Actually the second *in person* event in a year. We do virtual races every month
Apr 2
DIY Robocars via Twitter
Update: we're moving it back one day to Sunday (the 4th) at 11:00am instead
Apr 2
DIY Robocars via Twitter
@GrantEMoe @circuitlaunch Update: we're doing it on Sunday (4th) at 11:00am instead
Apr 2
DIY Robocars via Twitter
RT @chr1sa: Maybe we should have a mini @DIYRobocars race in our lower school's playground https://t.co/xLFeua1R6X
Mar 29
More…