Help with accident (LOGS)

Hello, yesterday I crashed my hexacopter :'( It was flying perfect all the morning but suddenly at 13:24 it was flying at 10-15 meters high and it rolled to the left and falled with no control.
3691082730?profile=original
It is destroyed as you can see in the picture, lucky it's not broken any electronics (I hope so).

Now I'm trying to figure out how that could happen. I'm analizing the logs and it seems like a brownout because all the systems where reset, the TLOG registered that, and the LOG just stop recording....


I don't know how that could happen, I have follow all your tips to avoid like, install a capacitor (3300uF 16V), voltage regulator, bridge JP1 removed (No servos installed)...

I'd appreciate your help with this, I've bought a new and better frame, so I'd like not to happen again... :(

2013-12-05 13-15-58.tlog

2013-12-05 13-15-58.rlog

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Exact same problem as I had a few months ago. Rebuild it and was fine,no reason for it at all.
  • This is the LOG

    2013-12-05 18-41 15.log

    https://storage.ning.com/topology/rest/1.0/file/get/3692894794?profile=original
  • I forgot to mention, it was the second flight I made with 3.1 RC5...

This reply was deleted.

Activity