I am new into the world of drones. I always wanted to build my own drone, so for a school project, I decided to build a hexacopter. The part description are:
H550 V3 Glass Fiber Hexcopter Frame 550mm
APM 2.6 (with external GPS)
6x Sunnysky 2212-13 980Kv
HK Afro 30 A ESC
Turningy 9x Radio
Batterry Luminier 5200 mah(4s)
So after putting everything together, I followed the calibration process, starting from the Fc, the radio and ESCs. Then I took it out for a flight and noticed some strange behaviors; Wobbling and after that it crashes.
I would like to know what's happening so I can fix this soon.
Thanks in advance.
Dennis Cane said:
oh man, that's terrible, you crashed your hexa copter.
I have put some 3 layers of double tape under my apm. Don't know if it's enough. And no, I did not balanced my props.
I found the problem. The ESC wiring wasn't good. After correcting this, I manage to get it in the air. Thanks for your help! I really appreciate it.
Thanks James! I tried loading one, I saw some improvement but somehow I still got unbalanced take off behaviors.