You need to be a member of diydrones to add comments!
This reply was deleted.
RT @chr1sa: Donkeycar 4.4 released with tons of new features, including path learning (useful with GPS outdoors), better Web and Lidar supp…
RT @NXP: We are already biting our nails in anticipation of the #NXPCupEMEA challenge! 😉 Did you know there are great cash prizes to be won…
RT @gclue_akira: レースまであと3日。今回のコースは激ムズかも。あと一歩 #jetracer https://t.co/GKcEjImQ3t
UC Berkeley's DIY robocar program https://roar.berkeley.edu/
RT @chr1sa: The next @DIYRobocars autonomous car race at @circuitlaunch will be on Sat, Dec 10. Thrills, spills and a Brazilian BBQ. Fun…
RT @arthiak_tc: Donkey car platform ... Still training uses behavioral cloning #TCXpo #diyrobocar @OttawaAVGroup https://t.co/PHBYwlFlnE
RT @emurmur77: Points for style. @donkeycar racing in @diyrobocars at @UCSDJacobs thanks @chr1sa for taking the video. https://t.co/Y2hMyj1…
RT @SmallpixelCar: Going to @diyrobocars race at @UCSDJacobs https://t.co/Rrf9vDJ8TJ
RT @SmallpixelCar: Race @diyrobocars at @UCSDJacobs thanks @chr1sa for taking the video. https://t.co/kK686Hb9Ej
RT @PiWarsRobotics: Presenting: the Hacky Racers Robotic Racing Series in collaboration with #PiWars. Find out more and register your inter…
RT @Hacky_Racers: There will be three classes at this event: A4, A2, and Hacky Racer! A4 and A2 are based around UK paper sizing and existi…
Any work on this lately? Seems like it would be a relatively light and non-mechanically-complex alternative to tilt rotors and the like. Though... weight would be more limited, so maybe not a heavy duty uav, but I still like the idea.
in 2014 theres still no option to hold a fixed wing plane in any orientation such as knife edge or 3D hover.
I'm guessing it'll be along soon now that Pixhawk is with us.
in the meantime, my solution is to fit an Eagletree Guardian in series with Pixhawk.
If I want to do aerobatics I select Manual on Pixhawk and activate 3D mode on Guardian - its fantastic!
if I find ive flown too far away, I select manual on the guardian and activate RTH on Pixhawk and she toddles home to Daddy
I know APM Copter supports conventional helicopters, but does it with a pixhawk enable them to do 3D aerobatics sequences like this: https://www.youtube.com/watch?v=ZefZcDDFyik
Has anyone done this?
It is not available but it is certainly possible to develop it. I had it working once with a home made flight controller.
If it has to hover using height control and navigation, you will have to write more than just a little code; it will be a combination of features from ArduPlane and ArduCopter.