IRIS+ Radio

Hello,  I will soon be getting the IRIS+ and have a few questions about the radio.   First can someone tell me exactly which radio comes with it.     Also I plan on building 2 multi-rotors which will need a receiver.   The one is a 250 mini with the CC3D controller and the other is a 450 with the APM 2.6

I was hoping to use the Iris radio and just order 2 receivers.  Can I do this and if so what receivers will I need to order for this to work.

Thank you for any help you can offer

Grandpa Jake

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Here's the one that I use, it's what came with the original IRIS.

    http://www.frsky-rc.com/product/pro.php?pro_id=24

    You can use the transmitter with multiple different aircraft. I use my IRIS TX with two quads.
    • Thank you, looks like it will work perfect. And the price is very good
  • The IRIS+ comes with a FlySky FS-TH9x TX

    and here is an answer to your second question: two-transmitters-to-one-receiver

    -Todd

    • Are there options on the receivers that will work with the FlySky FS-TH9x      again I am going to use it with the IRIS+  but also building a 250 with a CC3D controller and a 450 with the AMP2.6 controller.  

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @chr1sa: The monthly @diyrobocars virtual race is starting now! https://www.twitch.tv/roboticists2
2 hours ago
Mike Whitney liked Mike Whitney's profile
Jul 19
DIY Robocars via Twitter
Jul 2
DIY Robocars via Twitter
Jun 26
Abdulatif Tlaib liked Ryan's profile
Jun 24
DIY Robocars via Twitter
RT @SmallpixelCar: First time at @wsraceways. After tuning @HokuyoUsa lidar signal and camera sensor on @NVIDIAEmbedded, my car was able to…
Jun 20
DIY Robocars via Twitter
RT @breadcentric: The handy bit about racing with self-driving cars is that one can type while the car is racing. Report from #AWSDeepRacer…
Jun 18
DIY Robocars via Twitter
RT @chr1sa: Our Bay Area @DIYRobocars meetup is now at 2,700 members. Next in-person events (in Oakland) are training day on July 17 and…
Jun 18
DIY Robocars via Twitter
Videos from the ICRA autonomous racing workshop are now available: https://linklab-uva.github.io/icra-autonomous-racing/
Jun 10
DIY Robocars via Twitter
RT @SmallpixelCar: Prepared race track for Warm Spring Raceways @wsraceways and looking forward to test my new car at RAMS RC @ramsaicar fa…
Jun 6
DIY Robocars via Twitter
RT @f1tenth: Trying out some nasty blocking maneuvers 🏎️🤖 #f1tenth #autonomousracing https://t.co/nMTstsaogM
Jun 5
DIY Robocars via Twitter
May 27
DIY Robocars via Twitter
RT @araffin2: I will talk this Saturday from 18:00 to 19:00 Paris time for the @diyrobocars community about learning to race in hours using…
May 27
DIY Robocars via Twitter
RT @a1k0n: Luckily the infeasible hairpin problem was easily reproducible in simulation and I could test the fix before bringing the car ba…
May 26
DIY Robocars via Twitter
RT @a1k0n: Another problem was that I was over-constraining the car's allowed accelerations, so it didn't think it could turn as tight as i…
May 26
DIY Robocars via Twitter
RT @a1k0n: Breaking the map up into two halves worked, but I had to be more careful about separating the inner track from outer. There's se…
May 26
More…