Is there interest for a printed logbook?

Are there anyone still interested in printed logbooks or is all now electronic?
3691348070?profile=original
We have built uavthunder.com and are testing few of those with Estonian Defence League as a practise UAV. We are also using logbooks (in Estonian) with these notebook covers with zipper:

I am wondering if anyone in RC commnity would be interested in buying the english version of this logbook?

Would there be someone kind enough to check if the english terms are correct?
Are we missing something essential?

The idea is to collect as little information as possible, but everything that is necessary.

Page 1:
PREFLIGHT CHECKLIST
Connect antenna, arm ground station, check:
1. the locations and heights of the waypoints;
2. fail-safe conditions.
Put the UAV ready for flight, check:
3. wing connections, elerons, servos;
4. battery, autopilot, radios, antennas, cables;
5. engine, propeller, propeller nut and spinner;
6. sensor, sensor mount, clean lens;
7. center of gravity.
Switch on the UAV, check:
8. radio link & sensor: video, telemetry, channel;
9. perform range ckeck;
10. home location and height;
11. battery voltage;
12. switch between flight modes (FPV or Auto);
13. elerons work, right direction;
14. stabilization works, right direction;
15. motor and propeller full speed test.
Before take-off, check:
16. inform the Air Traffic Service;
17. take off corridor against wind, free and safe;
18. visible airspace is free.

The logbook pages:
Logbook entry.: #
Date:
Pilot:
Location:
Mission:
Take-off:
Landing:
FT (min):
Total FT so far:
New total FT:
Temp:
Wind:
Percip.:
Failed take-offs:
Hard landings:
Detected errors, components requiring maintenance:
Mission description, comments and suggestions:

2 pages at the end of the logbook for components total flight hour calculation:
component:
no.:
Total FT when first mounted on UAV
Total FT when replaced
lifetime (flight hours)

Thank you!
Mattias




FrontPage.jpg

LogBook.jpg

PartsUsage.jpg

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

This reply was deleted.

Activity

DIY Robocars via Twitter
May 15
DIY Robocars via Twitter
May 14
DIY Robocars via Twitter
May 13
DIY Robocars via Twitter
RT @f1tenth: Say hi to our newest #F1TENTH creation for @ieee_ras_icra next week in Philly. It’s going to be huge! 😎 🔥 @AutowareFdn @PennEn…
May 13
DIY Robocars via Twitter
May 11
DIY Robocars via Twitter
May 8
DIY Robocars via Twitter
RT @SmallpixelCar: Noticed my car zigzagged in last run. It turned out to be the grass stuck in the wheel and made the odometry less accura…
May 8
DIY Robocars via Twitter
RT @SmallpixelCar: Test my car. RTK GPS worked great. Thanks @emlid for their support. https://t.co/EkQ6qmjmWR
May 8
DIY Drones via Twitter
RT @chr1sa: @kane That's @diydrones circa 2009. Still have a box of those Canon cameras that we used to strap into planes, just like this.…
May 3
DIY Robocars via Twitter
RT @chr1sa: Our next @diyrobocars race is going to be outside at a real RC racetrack in Fremont on May 28. Fully autonomous racing, head-to…
Apr 30
DIY Robocars via Twitter
RT @f1tenth: Our Spring 2022 F1TENTH course @PennEngineers is coming to an end with a head-to-head race as a big finale. So proud of our st…
Apr 26
DIY Robocars via Twitter
RT @DanielChiaJH: I wrote a thing! Throughout the development of my @diyrobocars car I've been using @foxglovedev Studio to visualize and d…
Apr 23
DIY Robocars via Twitter
RT @SmallpixelCar: My new car for high speed. Low body, everything ( @NVIDIAEmbedded Jetson Xavier NX, @emlid RTK GPS, IMC) under the deck…
Apr 23
DIY Robocars via Twitter
Apr 21
DIY Robocars via Twitter
RT @f1tenth: F1TENTH Race training setup @PennEngineers for our upcoming ICRA2022 @ieee_ras_icra competition. @OpenRoboticsOrg @IndyAChalle…
Apr 21
DIY Robocars via Twitter
RT @fatcatFABLAB: Proud to be hosting a restarted DIY Robocars NYC Meetup April 26. Come by if you want to talk about and race self-driving…
Apr 17
More…