I'm getting conflicted answers on the below setup, and was wondering if someone could help me once and for all.  My setup goes like this:  SK450 frame, NTM 2826 1000kv motors (9x4.7 props amp draw of around 12A), naza m V2 w/gps, 9x4.7 or 8045 props, Frsky 2.4ghz Rx and a 2200 3S 25C nano tech battery.  From what i see online, people are telling me the following is the way to calculate flight time:  2.2 / (total amp draw of motors 48) * 60 = how long in minutes, although that comes out to like minutes.  I see people with this exact setup and exact battery with a heavier metal frame saying they get 7-8 minutes.  Can someone please help with the amount of time I think i would get?  i dont have the quad built yet, but am looking to leverage all the 2200mAh lipos i have, rather than having to buy new ones :(  I'm good with 7-8 min flight times, but 2 min would be ridiculous :)  Any help someone can give would be totally awesome!!! Just looking for some logic and estimates of what i can "really" expect.  Thanks guys!!!!

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • It will weigh around 3 pounds, that includes any of the FPV gear I will put on it. The 12A per motor came from the Hobbyking site where I got the motors. They have this calculation:

    9x4.7 - 11.1V / 113W / 10.2A / 0.632kg thrust

    So I went conservative and rounded up to 12A considering I am using a 3S battery and very similar sized props. So that should generate around 12A I would imagine. Unless of course those numbers seem way off to people who have actually done those calculations. People recently have told me to expect around 8 minutes with this setup. So I'm thinking I am fine, but any feedback you have on my setup or if you disagree with those times, please let me know, thanks!
  • How much will your quad weigh when it's complete, and where did you come up with 12A per motor?

This reply was deleted.

Activity

DIY Robocars via Twitter
Jan 28
DIY Robocars via Twitter
RT @Heavy02011: ⁦@diyrobocars⁩ : A Home-brew computer club* for Connected Autonomous Driving. talk at #piandmore ⁦@PiAndMore⁩ on Jan 23rd h…
Jan 23
DIY Robocars via Twitter
RT @a1k0n: New blog post! Deep dive into my ceiling light based localization algorithm which runs in 1ms on a Raspberry Pi 3: https://t.co/…
Jan 23
DIY Robocars via Twitter
Great new guide to using @donkey_car https://custom-build-robots.com/donkey-car-e-book-en
Jan 23
DIY Robocars via Twitter
RT @chr1sa: The next @DIYRobocars virtual AI race is tomorrow morn at 9:00am PT. You can watch live on Twitch https://www.meetup.com/DIYRobocars/events/275268196/
Jan 22
DIY Robocars via Twitter
New version of Intel OpenBot! This resolves many of the issues with the first version, including a much smoother tr… https://twitter.com/i/web/status/1352395636369313798
Jan 21
DIY Drones via Twitter
Using ArduRover with an RTK GPS https://ift.tt/2N9I3RO
Jan 18
DIY Drones via Twitter
Jan 18
DIY Robocars via Twitter
Jan 18
DIY Robocars via Twitter
Jan 15
DIY Robocars via Twitter
Jan 15
DIY Drones via Twitter
Jan 14
DIY Robocars via Twitter
RT @Heavy02011: @diyrobocars : A Home-brew computer club* for Connected Autonomous Driving on Jan 23rd, 2021 https://www.meetup.com/Connected-Autonomous-Driving/events/275728684/ #Meetu…
Jan 14
DIY Robocars via Twitter
Jan 14
DIY Robocars via Twitter
RT @Heavy02011: ⁦@diyrobocars⁩ Autonomous Driving Assembly at #rC3. join us at https://rc3.world/rc3/assembly/diyrobocars-f1tenth/ ⁦@f1tenth⁩ ⁦@DAVGtech⁩ ⁦@DWalmroth⁩…
Jan 11
DIY Robocars via Twitter
RT @chr1sa: New car designs coming for our next @DIYRobocars @donkey_car virtual race on the 23rd. Choose any one you want at race time Le…
Jan 11
More…