MiniAPM v3.1

Hi,

I noticed a reference to this in a blog post:

http://www.goodluckbuy.com/miniapm-v3-1-mini-ardupilot-mega-2-6-external-compass-apm-flight-controller-for-multicopter-fpv.html

It looks too-good-to-be-true to me.

I was wondering if anyone had already purchaed one of these, and if so - are they any good?

Shane.

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

          • thank you for the correction

            i got to upstairs and test the GPS and it showing my house position now , however it still showing "Bad Compass Health" i follow this picture to rewire it3702826584?profile=original

            but i didnt do the wire soldering like the one i green circled .... is it a must to do so? cause my GPS board seems different then the one on the picture....or the "Bad Compass Health " cause of something eles ? my table dont have any electric right now excpet the board and the monitor ....any advise ? 

            • Question? Do you have to do this if you have the 3DR GPS?

              Thanks in advance...

            • David, read the threat, its all about the mini apm

              see http://www.rcgroups.com/forums/showpost.php?p=28893855&postcoun...

              thats your GPS I think?

              RC Groups - View Single Post - Witespy "mini" ReadyToFlyer 2.6 v3.1 for APM
              RC Groups - the most active Radio Control model community: electric and fuel rc airplanes,rc helis,rc boats and rc cars. Features discussion forums,…
      • Thanks Dieter

        Yes I spent a little time and figured out the connections on the Mini APM for GPS/Compass however I have no idea which cable is which on the GPS/Compass unit itself

        They have the standard connectors for an APM

        DSC05272_1200.jpg

        DSC05271_1200.jpg

        https://storage.ning.com/topology/rest/1.0/file/get/3702656564?profile=original
      • The green Chinese characters in the first pic means:

        The solder pad pointed by the arrow here has the same functionality as the JP2 jumper on an APM. It is used for firmware upgrade.

        And white in the second pic:

        Telemetry port, pins from left to right are GND, 5V, TX, RX

        • Hi Ye Wang,

          could you please explain this deeper? I thought Jumper2 on the Mini is jumper1 on the apm.

          what have this to do with firmware upgrade? Where is jumper2 located on the APM? I upgraded firmware on mini without jp2.

          thanks

      • I'm surprised that there is an internal compass jumper on these boards (I hadn't noticed that before) as the spec states 'No onboard compass'. Strange.

        Out of interest, did the (external) compass work before you cut the jumper?

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @chr1sa: Donkeycar 4.4 released with tons of new features, including path learning (useful with GPS outdoors), better Web and Lidar supp…
Nov 27, 2022
DIY Robocars via Twitter
RT @NXP: We are already biting our nails in anticipation of the #NXPCupEMEA challenge! 😉 Did you know there are great cash prizes to be won…
Nov 24, 2022
DIY Robocars via Twitter
RT @gclue_akira: レースまであと3日。今回のコースは激ムズかも。あと一歩 #jetracer https://t.co/GKcEjImQ3t
Nov 24, 2022
DIY Robocars via Twitter
UC Berkeley's DIY robocar program https://roar.berkeley.edu/
Nov 24, 2022
DIY Robocars via Twitter
RT @chr1sa: The next @DIYRobocars autonomous car race at @circuitlaunch will be on Sat, Dec 10. Thrills, spills and a Brazilian BBQ. Fun…
Nov 24, 2022
DIY Robocars via Twitter
RT @arthiak_tc: Donkey car platform ... Still training uses behavioral cloning #TCXpo #diyrobocar @OttawaAVGroup https://t.co/PHBYwlFlnE
Nov 20, 2022
DIY Robocars via Twitter
RT @emurmur77: Points for style. @donkeycar racing in @diyrobocars at @UCSDJacobs thanks @chr1sa for taking the video. https://t.co/Y2hMyj1…
Nov 20, 2022
DIY Robocars via Twitter
RT @SmallpixelCar: Going to @diyrobocars race at @UCSDJacobs https://t.co/Rrf9vDJ8TJ
Nov 8, 2022
DIY Robocars via Twitter
RT @SmallpixelCar: Race @diyrobocars at @UCSDJacobs thanks @chr1sa for taking the video. https://t.co/kK686Hb9Ej
Nov 8, 2022
DIY Robocars via Twitter
RT @PiWarsRobotics: Presenting: the Hacky Racers Robotic Racing Series in collaboration with #PiWars. Find out more and register your inter…
Oct 23, 2022
DIY Robocars via Twitter
RT @Hacky_Racers: There will be three classes at this event: A4, A2, and Hacky Racer! A4 and A2 are based around UK paper sizing and existi…
Oct 23, 2022
DIY Robocars via Twitter
Oct 23, 2022
DIY Robocars via Twitter
Oct 19, 2022
DIY Robocars via Twitter
Oct 18, 2022
DIY Robocars via Twitter
RT @NeaveEng: Calling all UK based folks interested in @diyrobocars, @f1tenth, @donkey_car, and similar robot racing competitions! @hacky_r…
Oct 13, 2022
DIY Robocars via Twitter
RT @araffin2: 🏎️ After hours of video editing, I'm happy to share a best of my Twitch videos on learning to race with RL. 🏎️ Each part is…
Oct 13, 2022
More…