terminal.JPG

I just installed APM 3.2rc1, from 3.1.3, on my hexa. Flew a short flight, came in to download logs and I can't do anything in terminal. I've tried hitting "enter" 3 times, made sure I'm connecting within 20 seconds. I grabbed my bare 2.5 board, also 3.1.3, installed 3.2rc1 and now that one will no longer work in terminal either. I tried MP 1.3.1 build 1.1.5229.30673 as del as beta MP 1.3.1.2 build 1.1.5234.14291.

Also tried a second pc with MP 1.3.1 with no luck. I'm not really sure if I should post here or in the APM section. Any suggestions are appreciated.

Thanks,

Barry

edit: I did an erase/reset on each board prior to installing 3.2rc1, so terminal was functioning normally immediately prior to the firmware installation. 

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Developer

    3.2 is removing the cli.

    • Well that would explain it! Thanks Michael.

  • Just reinstalled 3.1.4. Terminal works normally again. This was on my bare board, and I wasn't able to do an erase/reset because of the fact that I couldn't get terminal to work with 3.2rc1. Mod, should this be moved to the APM forum?

This reply was deleted.

Activity

DIY Robocars via Twitter
May 15
DIY Robocars via Twitter
May 14
DIY Robocars via Twitter
May 13
DIY Robocars via Twitter
RT @f1tenth: Say hi to our newest #F1TENTH creation for @ieee_ras_icra next week in Philly. It’s going to be huge! 😎 🔥 @AutowareFdn @PennEn…
May 13
DIY Robocars via Twitter
May 11
DIY Robocars via Twitter
May 8
DIY Robocars via Twitter
RT @SmallpixelCar: Noticed my car zigzagged in last run. It turned out to be the grass stuck in the wheel and made the odometry less accura…
May 8
DIY Robocars via Twitter
RT @SmallpixelCar: Test my car. RTK GPS worked great. Thanks @emlid for their support. https://t.co/EkQ6qmjmWR
May 8
DIY Drones via Twitter
RT @chr1sa: @kane That's @diydrones circa 2009. Still have a box of those Canon cameras that we used to strap into planes, just like this.…
May 3
DIY Robocars via Twitter
RT @chr1sa: Our next @diyrobocars race is going to be outside at a real RC racetrack in Fremont on May 28. Fully autonomous racing, head-to…
Apr 30
DIY Robocars via Twitter
RT @f1tenth: Our Spring 2022 F1TENTH course @PennEngineers is coming to an end with a head-to-head race as a big finale. So proud of our st…
Apr 26
DIY Robocars via Twitter
RT @DanielChiaJH: I wrote a thing! Throughout the development of my @diyrobocars car I've been using @foxglovedev Studio to visualize and d…
Apr 23
DIY Robocars via Twitter
RT @SmallpixelCar: My new car for high speed. Low body, everything ( @NVIDIAEmbedded Jetson Xavier NX, @emlid RTK GPS, IMC) under the deck…
Apr 23
DIY Robocars via Twitter
Apr 21
DIY Robocars via Twitter
RT @f1tenth: F1TENTH Race training setup @PennEngineers for our upcoming ICRA2022 @ieee_ras_icra competition. @OpenRoboticsOrg @IndyAChalle…
Apr 21
DIY Robocars via Twitter
RT @fatcatFABLAB: Proud to be hosting a restarted DIY Robocars NYC Meetup April 26. Come by if you want to talk about and race self-driving…
Apr 17
More…