My first post here as I intend to move away from Naza V2 to Pixhawk.
After 'working the problems', I managed to get a green light on the Pixhawk (yippeee!) but I cannot seem to start the motors.
I connected the Pixhawk to APM Planner > Inititial Setup > Failsafe, Radio IN bars are moving but not the motors. I checked again that the servo cables are plugged in correctly as per quick start, and it looks correct to me. Any suggestions?
Also, while I am here, is it possible to arm the Pixhawk despite being indoors with poor GPS?
Many thanks for your help!!