Discussions

Replies

    • Mike Carr > Udo June 11, 2014 at 4:04pm

      Where is the transmitter antenna?

      • Udo > Mike Carr June 11, 2014 at 4:25pm

        The FS-THX9 that comes with the IRIS is using the antenna on the back from the telemetry module, it does not have an "own" antenna. That's why I could plug the small piece of wood in where the "real" antenna would normally be. Btw, I was inspired by this post, take a look at the first picture:

        http://diydrones.com/group/iris/forum/topics/fpv-wiring-diagram-for...

  • Jon Gordyn June 10, 2014 at 10:48pm
    http://www.thingiverse.com/thing:350647

    I just printed out this mount and attached to the stock radio. Works great since it has clearance for the TX antenna and can be angled for better viewing
    • Todd > Jon Gordyn June 11, 2014 at 9:21am

      Wow, just what  I was looking for.

      Now to find someone with a 3D printer.....

    • Mike Carr > Jon Gordyn June 10, 2014 at 10:51pm
      Sweet, I will take a look. Thanks for the link.
  • AKRCGUY April 18, 2014 at 7:47am

    If there are any CAD or 3D design guys out there who want to send me a STL file for 3D printing, I'll print one, test and send you one.

  • Brad Hedges April 18, 2014 at 1:36am

    I built a transmitter tray which holds a monitor, my tablet, vid receiver & recorder, LiPo battery & a 5V BEC - the radio & bluetooth to my tablet are zip-tied to the tray.

This reply was deleted.

Activity

Neville Rodrigues liked Neville Rodrigues's profile
Jun 30
Santiago Perez liked Santiago Perez's profile
Jun 21
More…