Moderator

Multi Pilot Board and Framework

Hi ,
I'm Roberto Navoni , in the last six months I'm working to develop an Electronic , Firmware and software platform for UAV / UAG , R/C Enthusiastic . We're devoloping a community around this project.
I have a new approch . With my platform is possible to  develop different kind of application for different kind of UAV. I discover that in the world there're fantastic people that have greats idea , can develop the frame of their veichle , but don't know how to  use electronic and firmware to solve flying problem , so with my platform I try to teach to use firmware and hardware to solve thir problem. I decide to implement our system on arduino a great italian HW/FW project.

First prototype of MP Board 1.0

4272797408_7c90eac2a5.jpg


4269622160_0f8d4cb395.jpg


This is the link of project :
http://code.google.com/p/lnmultipilot10

This is the specification of our boards :
http://code.google.com/p/lnmultipilot10/wiki/MultiPilotBoardCapabilities

Some picture of board :
http://code.google.com/p/lnmultipilot10/wiki/multiboard


Our starting point was  Quad and Multicopter, We support and implement Aeroquad OS project  .
In our community we have develop first Mega variable pitch quad HG3. 2.7 m of Quad for 6.5 kg with 1 motor of 2.2 kw :)

4373218270_45578d8746.jpg


this is the link of wiki page of project :

http://code.google.com/p/lnmultipilot10/wiki/MultipilotHG3


If you need more information about it can contact me at : lasernav@gmail.com

Regards
Roberto

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Its Impressive.

    Does HG3 have vibration? Easy to tune pid parameters?

  • Is that board based off the MikroKopter ME schematic?
  • good work ,interesting ideas , i see you hae used 250 or450 heliblades , are you using the heli head too?
This reply was deleted.

Activity

DIY Robocars via Twitter
21 hours ago
DIY Robocars via Twitter
Saturday
DIY Robocars via Twitter
Saturday
DIY Robocars via Twitter
RT @f1tenth: Say hi to our newest #F1TENTH creation for @ieee_ras_icra next week in Philly. It’s going to be huge! 😎 🔥 @AutowareFdn @PennEn…
Saturday
DIY Robocars via Twitter
Wednesday
DIY Robocars via Twitter
May 8
DIY Robocars via Twitter
RT @SmallpixelCar: Noticed my car zigzagged in last run. It turned out to be the grass stuck in the wheel and made the odometry less accura…
May 8
DIY Robocars via Twitter
RT @SmallpixelCar: Test my car. RTK GPS worked great. Thanks @emlid for their support. https://t.co/EkQ6qmjmWR
May 8
DIY Drones via Twitter
RT @chr1sa: @kane That's @diydrones circa 2009. Still have a box of those Canon cameras that we used to strap into planes, just like this.…
May 3
DIY Robocars via Twitter
RT @chr1sa: Our next @diyrobocars race is going to be outside at a real RC racetrack in Fremont on May 28. Fully autonomous racing, head-to…
Apr 30
DIY Robocars via Twitter
RT @f1tenth: Our Spring 2022 F1TENTH course @PennEngineers is coming to an end with a head-to-head race as a big finale. So proud of our st…
Apr 26
DIY Robocars via Twitter
RT @DanielChiaJH: I wrote a thing! Throughout the development of my @diyrobocars car I've been using @foxglovedev Studio to visualize and d…
Apr 23
DIY Robocars via Twitter
RT @SmallpixelCar: My new car for high speed. Low body, everything ( @NVIDIAEmbedded Jetson Xavier NX, @emlid RTK GPS, IMC) under the deck…
Apr 23
DIY Robocars via Twitter
Apr 21
DIY Robocars via Twitter
RT @f1tenth: F1TENTH Race training setup @PennEngineers for our upcoming ICRA2022 @ieee_ras_icra competition. @OpenRoboticsOrg @IndyAChalle…
Apr 21
DIY Robocars via Twitter
RT @fatcatFABLAB: Proud to be hosting a restarted DIY Robocars NYC Meetup April 26. Come by if you want to talk about and race self-driving…
Apr 17
More…