hi, i have just finished building my quadcopter, all went well but i have found one big problem, it only gets half power and wont even lift of the floor even know the stick is full up.
i have a specktrum dx8, naza m v2 , i am using tiger 650kv motors with 13inch props, blue series 40amp ESC and a 5 cell lipo battery
please could someone tell me what i have done wrong
thanks daveo
Replies
Anybody know why the Naza causes the quad to drop like a rock, in manual mode....I had to catch it with gps mode to stop that crap.........
Do your props spin up to full speed? If so, they could be upside down.
Go through the first-flight setup again and follow each step again. Pay particular attention to the radio calibration.
Does Naza have a log file? I don't think so but they should. ;) I have found logging to be THE most useful feature but I may just be a data geek. I think Yaw overrides all others so check motor direction and numbering. A 650kv with 13" on 5c should have plenty of power.
Did your flight go something like this?
https://www.youtube.com/watch?v=Vr9JNbkikmY&t=53
I haven't figured it out yet either.
Attach a log file and folks might be able to see more easily.