Discussions

Pixhawk Telem connections...

Posted by David Kershaw on June 12, 2015 at 2:09pm

Hi Folks,

I am still very new to all of this but I never do things the easy way....

I already have 3DR radio fitted to my Pixhawk on the Hex I'm building but wanting more, I have a Minim OSD and a Teensy 3.1 telemetry adapter...

I have been told these can all be "daisy chained" together, ie, GND to GND +5V to +5V and TX to TX and so on....

Is this correct?

Any help with this would be great....

David.

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • David Kershaw June 12, 2015 at 10:22pm

    This is what I'm thinking....

    3702026410?profile=original

    • Admin
      Thomas J Coyle III > David Kershaw June 13, 2015 at 2:45pm

      @David,

      That might work, but I do not know for sure.

      Regards,

      TCIII AVD

  • Admin
    Thomas J Coyle III June 12, 2015 at 2:34pm

    @David,

    Here is a start: Link

    Regards,

    TCIII AVD

    • David Kershaw > Thomas J Coyle III June 13, 2015 at 4:41am

      Thanks for the link Thomas...

      I had seen the page on the Ardupilot site and indeed a few others but none of the talk about running all three boards at the same time???

This reply was deleted.

Activity