problem after arming the motors

hello 
the motors spin only after doing the arming of motors , but when i unplug the battery i can't spin the motors again
what's the problem
thank you very much 

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Assuming that this isn't a troll:

    If you have not read the guides to how to setup the arducopter, I suggest you start reading it at http://copter.ardupilot.com/wiki/introduction/.

    Now to answer your question, the battery is needed to power up the quadrotor. Therefore if the battery is unplug, nothing should turn on (unless your APM happens to be connected to the PC through a USB cable).

    Looking at your replies, I am assuming that English isn't your cup of tea. Therefore you could have meant something else which you were not able to say it clearly.

    it's must usually do the arming of motors to spin the motors or i can spin automatically the motors after finishing the arming ?

    The APM has this 'failsafe program' loaded into it so that people would not be harmed by accidentally pushing the control sticks and the props start spinning without warning. Therefore the process of arming is like releasing the safety lock to allow the props to spin on a nudge of the control sticks. Disarming would mean putting on the safety lock again. Is it clear enough?

  • I'm guessing there is a bit of a language barrier here.  Otherwise this would be like calling the cable company to complain that your TV isn't working when the power is out.

  • this has to be a troll right?

    • Let's not jump to that conclusion. Lot's of things can stop motors from spinning, not just trolls.

      • That's very true actually, sorry if I was in any way judging.

    • it's must usually do the arming of motors to spin the motors or i can spin automatically the motors after finishing the arming ?

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @gclue_akira: 柏の葉で走行させてるjetracerの中身 #instantNeRF #jetracer https://t.co/giVvuE4hP7
Jul 4
DIY Robocars via Twitter
Cool web-based self-driving simulator. Click save when the AI does the right thing https://github.com/pncsoares/self-driving-car
Jul 4
DIY Robocars via Twitter
RT @donkey_car: Human-scale Donkey Car! Hope this makes it to a @diyrobocars race https://www.youtube.com/watch?v=ZMaf031U8jg
Jun 25
DIY Robocars via Twitter
Jun 25
DIY Robocars via Twitter
Jun 16
DIY Robocars via Twitter
RT @GrantEMoe: I won my first @diyrobocars @donkey_car virtual race! Many thanks to @chr1sa @EllerbachMaxime @tawnkramer and everyone who m…
Jun 13
DIY Robocars via Twitter
RT @gclue_akira: JetRacerで自動走行したコースを、InstantNeRFで再構築。データセットは別々に収集 #jetracer #instantNeRT https://t.co/T8zjg3MFyO
Jun 13
DIY Robocars via Twitter
RT @SmallpixelCar: SPC 3.0 Now the motor also works. This car is doable. I just need to design a deck to mount my compute and sensors. http…
Jun 13
DIY Robocars via Twitter
RT @SmallpixelCar: My new car SPC 3.0. https://t.co/CKtkZOxeNQ
Jun 7
DIY Robocars via Twitter
RT @SmallpixelCar: High speed at @diyrobocars thanks @EdwardM26321707 for sharing the video https://t.co/o4317Y2U1S
Jun 7
DIY Robocars via Twitter
RT @SmallpixelCar: Today at @RAMS_RC_Club for @diyrobocars. Used @emlid RTK GPS and @adafruit @BoschGlobal IMU. Lap time 28s https://t.co/R…
May 28
DIY Robocars via Twitter
May 15
DIY Robocars via Twitter
May 14
DIY Robocars via Twitter
May 13
DIY Robocars via Twitter
RT @f1tenth: Say hi to our newest #F1TENTH creation for @ieee_ras_icra next week in Philly. It’s going to be huge! 😎 🔥 @AutowareFdn @PennEn…
May 13
DIY Robocars via Twitter
May 11
More…