Moderator

Share your drone info thread

Hi everyone,

I'm creating this thread to share your drone/copter information. I believe, this would help immensely for newbies like me during the initial build. For example, the Chris's blog on cheap Hobby King quad configuration is really a good resource.  

I don't want to burden anyone who is willing to share their info. Hence all fields are optional. Atleast the first 5 fields are ideal. Please find the list of fields to copy/paste at the end, so you can start filling :-). 

Here goes information about my quad.

frame: Quadcopter (3DRobotics)
controller/autopilot: APM1
esc: 20A (3DRobotics)
motors: 850Kv (3DRobotics)
propellers: 10x47, APC (3DRobotics)
motor to motor distance: -- inches

battery:  4S 3300mAh (Turnigy nano-tech)
total weight: -- lbs
flying time: 15 minutes (average)

radio: Turnigy 9X 
video/osd: none
other: Sonar, Xbee, GPS/Mag, Attopilot current sensor

 

Misc: 

Turnigy 9X: Mode1 -> Mode2 change, Li-ion battery hack
photos:

3690911422?profile=original 

3690911286?profile=original

 

 

3690911495?profile=original

-------------

frame:
controller/autopilot:
esc:
motors:
propellers:
motor to motor distance: -- inches

battery:
total weight: -- lbs
flying time:

radio:
video/osd:
other:

Misc (hacks/mods):

photos:

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @chr1sa: The monthly @diyrobocars virtual race is starting now! https://www.twitch.tv/roboticists2
3 hours ago
Mike Whitney liked Mike Whitney's profile
Jul 19
DIY Robocars via Twitter
Jul 2
DIY Robocars via Twitter
Jun 26
Abdulatif Tlaib liked Ryan's profile
Jun 24
DIY Robocars via Twitter
RT @SmallpixelCar: First time at @wsraceways. After tuning @HokuyoUsa lidar signal and camera sensor on @NVIDIAEmbedded, my car was able to…
Jun 20
DIY Robocars via Twitter
RT @breadcentric: The handy bit about racing with self-driving cars is that one can type while the car is racing. Report from #AWSDeepRacer…
Jun 18
DIY Robocars via Twitter
RT @chr1sa: Our Bay Area @DIYRobocars meetup is now at 2,700 members. Next in-person events (in Oakland) are training day on July 17 and…
Jun 18
DIY Robocars via Twitter
Videos from the ICRA autonomous racing workshop are now available: https://linklab-uva.github.io/icra-autonomous-racing/
Jun 10
DIY Robocars via Twitter
RT @SmallpixelCar: Prepared race track for Warm Spring Raceways @wsraceways and looking forward to test my new car at RAMS RC @ramsaicar fa…
Jun 6
DIY Robocars via Twitter
RT @f1tenth: Trying out some nasty blocking maneuvers 🏎️🤖 #f1tenth #autonomousracing https://t.co/nMTstsaogM
Jun 5
DIY Robocars via Twitter
May 27
DIY Robocars via Twitter
RT @araffin2: I will talk this Saturday from 18:00 to 19:00 Paris time for the @diyrobocars community about learning to race in hours using…
May 27
DIY Robocars via Twitter
RT @a1k0n: Luckily the infeasible hairpin problem was easily reproducible in simulation and I could test the fix before bringing the car ba…
May 26
DIY Robocars via Twitter
RT @a1k0n: Another problem was that I was over-constraining the car's allowed accelerations, so it didn't think it could turn as tight as i…
May 26
DIY Robocars via Twitter
RT @a1k0n: Breaking the map up into two halves worked, but I had to be more careful about separating the inner track from outer. There's se…
May 26
More…