Moderator

Share your drone info thread

Hi everyone,

I'm creating this thread to share your drone/copter information. I believe, this would help immensely for newbies like me during the initial build. For example, the Chris's blog on cheap Hobby King quad configuration is really a good resource.  

I don't want to burden anyone who is willing to share their info. Hence all fields are optional. Atleast the first 5 fields are ideal. Please find the list of fields to copy/paste at the end, so you can start filling :-). 

Here goes information about my quad.

frame: Quadcopter (3DRobotics)
controller/autopilot: APM1
esc: 20A (3DRobotics)
motors: 850Kv (3DRobotics)
propellers: 10x47, APC (3DRobotics)
motor to motor distance: -- inches

battery:  4S 3300mAh (Turnigy nano-tech)
total weight: -- lbs
flying time: 15 minutes (average)

radio: Turnigy 9X 
video/osd: none
other: Sonar, Xbee, GPS/Mag, Attopilot current sensor

 

Misc: 

Turnigy 9X: Mode1 -> Mode2 change, Li-ion battery hack
photos:

3690911422?profile=original 

3690911286?profile=original

 

 

3690911495?profile=original

-------------

frame:
controller/autopilot:
esc:
motors:
propellers:
motor to motor distance: -- inches

battery:
total weight: -- lbs
flying time:

radio:
video/osd:
other:

Misc (hacks/mods):

photos:

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

      • Thanks Marius,

        Please answer to the best of your abilities:

        1. What made you want to buy a drone in the first place? What do you use it for?

        2. How much did you pay for your drone? Where did you get it from?

        3. How did you learn to fly a drone?

        4. Walk me through the process of flying a drone. What do you have to prepare beforehand? What do you have to do in flight?

        5. Tell me about a time you had problems with your drone.

        6. What worries, problems or concerns do you have when you operate your drone?  

        7. What kinds of safety precautions or measures do you take with your drone? For yourself when flying?

        8. What kind of liabilities do you think you could face flying a drone?  Do you think there is liability in flying a drone?

        9. Do you know anyone else like a hobbyist or any other organizations that use a drone?

        Thanks Again!

        • Hi Anthony, I'll answer your questions as they apply to me:

          1. Photography. I have a project where I need to take good quality photographs from above.
          2. Between 11 and 15 hundred Euro plus the Radio. I bought most of the parts from Hobbyking.
          3. Bought a mini quad from XL Toys.
          4a Courage! If you buy a RTF, not very much. If you are like me, building by your own drone, it takes thinking, calculation, time and you´re scared when hovering for the first time :-)
          4b Make sure everything is OK. I have made a checklist. Then the arming check when powering on: gyros, compasses, GPS, batteries, radio connection and eventually telemetry.
          4c Keep you eyes on the drone and your hands on the radio. Let no one disturb you and you're fine.
          5. Except for the weak landing gear not much. I had to invent my own landning gear.
          6. Hurting someone! The weight and the rotating carbon fiber propellers make the drone dangerous.
          7. No people around, especially never, ever below. Have setup as many Fail-safe operations as possible for battery, transmitter, outside allowed area. And have a switch, on my transmitter, for RTL (Return To Launch).
          8. I have a separate insurance when flying official. When performing test flights in my garden or at any allowed RC field I have no problem.
          9. Yes, I have friends flying quads. I'm the only one flying a drone of this size.

          That's my 10 cents :-)

          Anders
          Sweden

  • Hello,

    ...long way from the 'ugliest 3DR over-crashed quad shared earlier'

    The second I built is all eBay Chinese parts, excluding the Home Depot arms and 2 recovered plates from an old frame.

    • Apm2.6
    • 4x1Esc Quattro
    • Sunnsky 980Kv
    • Turnigy 8Ch receiver
    • Ublox GPS+Compass
    • 200Mw 5.8 Ghz AV TX
    • Home-Depot curtain aluminium arms
    • Balanced props (with nail lacquer)
    • 2.6 or 2.2 3S Lipo

    1.14 Kg (battery and camera+TX)

    Fly time: 16 min (2.6 amps), and 10 min with 2.2 Amps. This copter does not have legs because I launch it and catch it by hand. This copter took a hell of a lot of time to tune up and figure out all malfunctions, but finally works almost as the 3DR.

    3701842742?profile=original   

    3701842911?profile=original

    The second copter (my original 3DR) is has 3DR original electronic modules except;

        Esc's were replaced with Quattro 30Amps,

        and

        the GPS+Compass with an Ublox module.

    The frame is built from leftovers of the original 3DR frame and Home Depot aluminium plat-band.

    It suffered to many crashes, that's why is all bend. I use a 8MP / 1080 Remote Wifi cam on a Walkera

    G-2D Gimbal, which works just fine.

    • Balanced props (with nail lacquer)
    • 2.6 or 2.2 3S Lipo
    • 1.24 Kg (with all load on it)
    • Fly Time 10..15 min
    • Turnigy RX 8 channels

    3701842889?profile=original3701843014?profile=original

  • frame: Tarot 680 carbon Hexa
    controller/autopilot: Zero UAV YS-X4P
    esc: 20A DJI
    motors: DJI E600 propulsion
    propellers: 12x4.2 self tightening
    motor to motor distance: 29 inches
    battery: 6S 8000 MAH (Turnigy)
    total weight: 9lbs
    flying time: 15 minutes (average)
    radio: futaba 8Fg
    video/osd: GOPRO 1 FPV predator
    other: GPS/Mag, AUTOPILOT, follow me etc
    The DJI system is so smooth right out of the box.
    • Sorry, here they are. 

      20140925_211936.jpg

      20140925_212230.jpg

      20140925_212033.jpg

      • Moderator

        Thanks Barry! Looks nice!

        • Hi All. This is my first post .

          This is a great place for newbies like me.

          Here is my own design Hexa and my first multicopter.

          Without this forum I would never have got this far.

          Custom center hub and skids, Designed on Autocad and Water Cut from 1.6 aluminium Sheet, Powder Coated

          APM 2.6 -  V3.1.5 

          Quantum GPS/Compass

          3DR Telementery  - mission planner (Laptop) Droidplanner 2 (Nexus 7)

          Frsky X8 Receiver - Futaba 9cap with 2.4 Frsky modual 

          Plush 40amp ESC

          Turnigy 4225-390kv 16 pole motors

          Turnigy Propellers 12 x 4.7 (waiting on 14 x 4.7 Carbon)

          Nanotech 6S 5000mah x 2 in parallel. 

          16mm Dia Carbon fiber booms

          Tarot motor mounts

          Mixed flight time 14 min approx

          all up weight 4.5 KG (no camera yet)

          Flies great. Bit of playing with the PID's thanks again to DIY Drones.

          Thanks John H

          Auckland

          New Zealand

          3702767823?profile=original

          3702767750?profile=original

           3702767936?profile=original3702767961?profile=original

          • Just forgot to say.

            Motor centers 860mm

            Cheers

            • Moderator

              Nice work John! I like the place you've placed the batteries!!

              • Yea great idea on the battery location. Good flight time.

This reply was deleted.

Activity