Hi everyone,
I'm creating this thread to share your drone/copter information. I believe, this would help immensely for newbies like me during the initial build. For example, the Chris's blog on cheap Hobby King quad configuration is really a good resource.
I don't want to burden anyone who is willing to share their info. Hence all fields are optional. Atleast the first 5 fields are ideal. Please find the list of fields to copy/paste at the end, so you can start filling :-).
Here goes information about my quad.
frame: Quadcopter (3DRobotics)
controller/autopilot: APM1
esc: 20A (3DRobotics)
motors: 850Kv (3DRobotics)
propellers: 10x47, APC (3DRobotics)
motor to motor distance: -- inches
battery: 4S 3300mAh (Turnigy nano-tech)
total weight: -- lbs
flying time: 15 minutes (average)
radio: Turnigy 9X
video/osd: none
other: Sonar, Xbee, GPS/Mag, Attopilot current sensor
Misc:
Turnigy 9X: Mode1 -> Mode2 change, Li-ion battery hack
photos:
-------------
frame:
controller/autopilot:
esc:
motors:
propellers:
motor to motor distance: -- inches
battery:
total weight: -- lbs
flying time:
radio:
video/osd:
other:
Misc (hacks/mods):
photos:
Replies
controller/autopilot: Dropix (Drotek)
esc: 20a (Tunigly Plush, stock firmware)
motors: MT3506 600kv (Tiger Motors)
propellers: 12x4.7 (Hobbyking Carbon, much better for this size than the 14x5 Xoar I had before)
Center to Motor axe: 40cm
battery: 3000mA / 4s (Hacker x-eco 20C)
total weight: 1.350kg
flying time: 10min
radio: Taranis / DJI Lightbridge
video/osd: DJI Lightbridge
other: Go Pro 3 for video / fpv on alpha gel
Misc (hacks/mods): Dipole antenna for 433mhz datalink, added a covering plate for the electronics, controller attached directly to frame
photos:
Alien Quadcopter Frame, APM 2.6 Controller GPS, Afro 30A ESC's, NTM 28-30S 900KV motors, 4S 3300mah Nanotech, Graupner 10x5 Props, Brushless Gimbal, Alexmos BGC Controller, Mobius wide angle camera, 2 watt video TX, and Frsky radio.
Hi there I will build a Quad and here is my list of components.
I would like to comment about this setting.
I think a battery of 5000mAh 4S can be too much for him
Can you give me your opinions?
RADIO: Flysky FS-TH9X
FRAME: Q450 V3 Glass Fiber Quadcopter Frame 450mm - Integrated PCB Version
MOTORS: Sunnysky V2216 800KV Outrunner Brushless Motor
ESC: DYS 30A Brushless Programmable ESC V2 - SimonK 2-5S
BATTERY: ZIPPY Flightmax 5000mAh 4S1P 30C (Weight=526g)
FLIGHT CONTROLLER: APM 2.6 ArduPilot
3DR Radio Telemetry Kit 915Mhz
GPS uBlox NEO-6M module with Compass.
APM Arduflyer Power Module V1.0
MAVLink-OSD V2.0
PROPELLERS: GEMFAN 9x4.7" or Slow Fly Electric Prop 10X4.5"
LANDING GEAR: ATG Universal DIY FPV ANTI-Vibration Multifunction Landing Skid (Weight=340g)
Thanks
Ramiro Diz
controller/autopilot: apm 2.6
esc:e600 20a
motors:e600 3508/415kv
propellers:12x4.2 in
motor to motor distance: -- 32inches
battery:2 SPC 3s5000 mah 50c 11.1v
total weight: --4.5 lbs roughly
flying time:20 minutes with 35% battery remaining
radio:devo 10
video/osd:
other:
Misc (hacks/mods):3dr gps and telemetry
photos:
1417398196847.jpg
Items in italic have been added after the picture was taken.
Janne, what's your flight time using this setup?
20min with 5800mAh ZIPPY
30min with 10000mAh Multistar (10C)
A professional one, I love it.
I am working with an Engineering student at KU to develop a product for drones. Would you be open to answering some questions in regard to your drones?
Thanks
With pleasure, any time. M.C.