Discussions

Posted by Thomas J Coyle III on June 17, 2009 at 9:20am

Hi all, Anyone have a source for ELAPOR foam used in the Multiplex models? Regards, TCIII

You need to be a member of diydrones to add comments!

elapor, foam

Email me when people reply –

Admin

Thomas J Coyle III June 17, 2009 at 6:37pm

Hi all,

Thanks for the responses. Much appreciated

It looks like www.rcfoam.com might be a good source for foam sheets/blocks to work with the Multiplex ELAPOR foam.

They also have the 8mm carbon fiber rods that I have been looking for that everyone else is out of.

Regards,
TCIII

Depron and EPP Foam Suppliers, Carbon Fiber Sheets, Carbon Rods and Tubes, RC Model Airplane Engine…

Depron and EPP Foam Suppliers, Carbon Fiber Sheets, Carbon Rods and Tubes, We Also Have RC Model Airplane Engines, Lipo Batteries
Moderator

Gary Mortimer June 17, 2009 at 1:24pm

Peters right, you can buy the chemicals to make the foam quite easily but its the mold making.
Peter Seddon June 17, 2009 at 12:30pm

I think you will find Elapor is a special blend of foam that is used only for moulding. EPP (expanded polypropylene) which is similar in many respects is available in sheet and is probably the nearest.

Peter