Terminal Screen - Is this a Problem?

3 year old 3DR Y6 kit with APM2.6, two crashes in that time, but cannot seem to get it back to stable.  I noticed that in terminal mode, after connect, it displays "ublox" then garbage keeps being displayed.  Not sure if the GPS/Compass took the brunt of both crashes, or what.  In flight it tends to roll left.  I am starting at the beginning (re-flash firmware to 3.2.1), calibrate, etc.

Does anyone know from the photo perhaps the culprit on the garbage it keeps reading out?

Thanks!

Nelson

TermMode.jpg

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • That is normal. Terminal was removed after 3.1.5.

  • T3

    Make sure in the terminal window you have APM selected, not Pixhawk.

    • Yup, tried it again being sure it was APM, and the garbage keeps coming.  Thanks.

      Nelson

      • T3

        Hmm you made sure you weren't connected over mavlink first, right?  It needs to be disconnected and cycle power before you hit it up with the terminal.

        • Broke for lunch, disconnected the copter.  After I saw your reply, connected the copter to the laptop, went straight to Terminal, and connected.  More of the same stuff.

          Thanks, Nelson

This reply was deleted.

Activity

DIY Robocars via Twitter
Saturday
DIY Drones via Twitter
RT @chr1sa: After more than a year of only virtual races, @DIYRobocars returns to the newly renovated @circuitlaunch on May 22 for the resu…
Apr 11
DIY Robocars via Twitter
RT @DAVGtech: And now available with LiDAR 🔥 https://twitter.com/Heavy02011/status/1381137016381964293
Apr 11
DIY Robocars via Twitter
RT @Heavy02011: #VirtualRaceLeague: @DIYRobocars Race #9 - #ParkingLotNerds #thunderhillracetrack, CA Join us for the next race April 24th,…
Apr 11
DIY Robocars via Twitter
RT @DWalmroth: Weather's finally cooperating, looking forward to racing 1:10 scale autonomous cars outdoors again! @diyrobocars, @NVIDIAEm…
Apr 7
DIY Robocars via Twitter
RT @AIDRI_: I finally succeeded in optimizing the trajectory and speed of a car on a #racetrack. Next step: implement a 2d controller and…
Apr 7
DIY Robocars via Twitter
@jetdillo @circuitlaunch Actually the second *in person* event in a year. We do virtual races every month
Apr 2
DIY Robocars via Twitter
Update: we're moving it back one day to Sunday (the 4th) at 11:00am instead
Apr 2
DIY Robocars via Twitter
@GrantEMoe @circuitlaunch Update: we're doing it on Sunday (4th) at 11:00am instead
Apr 2
Laurie J. Troy liked Jasper Kueppers's profile
Apr 1
DIY Robocars via Twitter
RT @chr1sa: Maybe we should have a mini @DIYRobocars race in our lower school's playground https://t.co/xLFeua1R6X
Mar 29
DIY Robocars via Twitter
If anybody wants to join us for an informal outdoors hack/race we're going to be meeting at the @CircuitLaunch park… https://twitter.com/i/web/status/1375907409223249923
Mar 27
DIY Robocars via Twitter
RT @SmallpixelCar: Ready to reopen, innovation has to continue. Inside/outside, LiDAR/GPS, race/delivery https://t.co/jpmvttoHEd
Mar 26
DIY Drones via Twitter
RT @DAVGtech: By far best race yet! Congratulations to the winner @Heavy02011 🥇🏆🍾👏👏👏 @diyrobocars @donkey_car @NVIDIAEmbedded https://t.co/…
Mar 20
DIY Robocars via Twitter
RT @Heavy02011: #VirtualRaceLeague: @DIYRobocars Race #8 - #ParkingLotNerds ⁦@DAVGtech⁩ ⁦@DWalmroth⁩ ⁦@OttawaAVGroup⁩ - join us tomorrow h…
Mar 20
DIY Drones via Twitter
RT @mrpollo: 11 years ago, the pxIMU was announced to the world on @DIYDrones, and it changed the life of many (mine included). The followi…
Mar 18
More…