UAVcamera setting

i have problem with my image which is blur problem. my camera (canon sx260 hs) setting is f-stop f/4, exposure time 1/1000 sec, ISO speed ISO-200, exposure bias 0 step, focal length 9mm, max aperture 4 and metering mode is pattern. my flying height about 300m and uav cruise speed 12 m/s. average airspeed 10- 18. how to get sharp image?. i hope anyone can advise me. thank you

IMG_0360.JPG

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Hi, This post is old, but my problem is the same, with ISO 100 and shuter speed 1/1000 I have sharpness problems, What camera you have now? Thank You.

    Best regards,

    Guillermo

    Andreas Breitenstein said:

    Hi Nazrin,

    The SX260 is a terrible camera for AP. Even with the smallest amount of vibration it is impossible to get sharp pictures. The vibrations are transferred to the lens, and the lens actually vibrates blurring the pictures.

    I dropped it for a camera with a fixed lens and have never had a problem since.

  • Could you please provide the parameter again?

    your link does not work.

    Thanks, 

    Juan


    Alex said:

    Hi Nazrin,

    I'm using a Canon SX230 with acceptable results :

    3701780688?profile=original

    The picture was done over a sunflower field, at 110m altitude.

    If you want , try the parameters that I use:

    http://www.myap.ro/wp-content/uploads/2014/07/Gluonpilot-photomappi...

    Starting with page 15.

  • Hi, Nazrin

    Have you solved this problem? I'm suffering from the same blur issue. If so please let me know how to get it. Thanks in advance

  • Hi Nazrin,

    I'm using a Canon SX230 with acceptable results :

    3701780688?profile=original

    The picture was done over a sunflower field, at 110m altitude.

    If you want , try the parameters that I use:

    http://www.myap.ro/wp-content/uploads/2014/07/Gluonpilot-photomappi...

    Starting with page 15.

    • Hi Alex,

      Do you have a live link to your parameters?  I'm using a Canon SX260HS on a 3DR Iris + and using KAP UAV script to take images for stitching.  Images are okay but not as sharp as what you've posted above.  Thanks,

      Kamille

  • Moderator
    Also set focus to infinity and lock it. This will speed up the reset ready for the next photo.
  • I am using SX260 annd SX280  and pictures are ok.

    ISO 400, shutter 1/2000, EV 0.

    Airspeed 10-12 m/s, flight level 100-200m

    • How trigger the sx280, I am findig the chdk for that, and nothing.

      thanks for your help

    • Marek,

      Are you shooting in manual mode?  I see above your ISO and shutter, what F stop?  And lastly, how are you / do you look the focus to infinity?

      TIA,

      Tim

      • Hi, 

        normally using time (shutter) priority so f-stop depends on light conditions

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @a1k0n: Did I get rid of hand-tuned parameters? Yes. Am I still hand-tuning more parameters? Also yes. I have a few knobs to address the…
yesterday
DIY Robocars via Twitter
RT @a1k0n: I'm not going to spoil it, but (after charging the battery) this works way better than it has any right to. The car is now faste…
yesterday
DIY Robocars via Twitter
RT @a1k0n: Decided to just see what happens if I run the sim-trained neural net on the car, with some safety rails around max throttle slew…
yesterday
DIY Robocars via Twitter
Saturday
DIY Robocars via Twitter
RT @SmallpixelCar: @a1k0n @diyrobocars I learned from this. This is my speed profile. Looks like I am too conservative on the right side of…
Saturday
DIY Robocars via Twitter
RT @a1k0n: @SmallpixelCar @diyrobocars Dot color is speed; brighter is faster. Yeah, it has less room to explore in the tighter part, and t…
Saturday
DIY Robocars via Twitter
RT @a1k0n: I'm gonna try to do proper offline reinforcement learning for @diyrobocars and throw away all my manual parameter tuning for the…
Friday
DIY Robocars via Twitter
RT @circuitlaunch: DIY Robocars & Brazilian BBQ - Sat 10/1. Our track combines hairpin curves with an intersection for max danger. Take tha…
Thursday
DIY Robocars via Twitter
RT @SmallpixelCar: Had an great test today on @RAMS_RC_Club track. However the car starts to drift at 40mph. Some experts recommended to ch…
Sep 11
DIY Robocars via Twitter
RT @gclue_akira: 世界最速 チームtamiyaのaiカー https://t.co/1Qq2zOeftG
Sep 10
DIY Robocars via Twitter
RT @DanielChiaJH: Always a good time working on my @diyrobocars car at @circuitlaunch. Still got some work to do if I’m to beat @a1k0n howe…
Sep 10
DIY Robocars via Twitter
RT @SmallpixelCar: My new speed profile for @RAMS_RC_Club track https://t.co/RtLb7TcgIJ
Sep 10
DIY Robocars via Twitter
RT @SmallpixelCar: Practiced at @RAMS_RC_Club today with my new @ARRMARC car https://t.co/AEu2hCx89T
Aug 28
DIY Robocars via Twitter
Aug 24
DIY Robocars via Twitter
RT @gclue_akira: 柏の葉で走行させてるjetracerの中身 #instantNeRF #jetracer https://t.co/giVvuE4hP7
Jul 4
DIY Robocars via Twitter
Cool web-based self-driving simulator. Click save when the AI does the right thing https://github.com/pncsoares/self-driving-car
Jul 4
More…