You need to be a member of diydrones to add comments!
This reply was deleted.
Activity
RT @Heavy02011: @diyrobocars : A Home-brew computer club* for Connected Autonomous Driving. talk at #piandmore @PiAndMore on Jan 23rd h…
RT @a1k0n: New blog post! Deep dive into my ceiling light based localization algorithm which runs in 1ms on a Raspberry Pi 3:
https://t.co/…
Great new guide to using @donkey_car
https://custom-build-robots.com/donkey-car-e-book-en
RT @chr1sa: The next @DIYRobocars virtual AI race is tomorrow morn at 9:00am PT. You can watch live on Twitch
https://www.meetup.com/DIYRobocars/events/275268196/
New version of Intel OpenBot! This resolves many of the issues with the first version, including a much smoother tr… https://twitter.com/i/web/status/1352395636369313798
RT @Heavy02011: @diyrobocars : A Home-brew computer club* for Connected Autonomous Driving on Jan 23rd, 2021 https://www.meetup.com/Connected-Autonomous-Driving/events/275728684/ #Meetu…
RT @Heavy02011: @diyrobocars Autonomous Driving Assembly at #rC3. join us at https://rc3.world/rc3/assembly/diyrobocars-f1tenth/ @f1tenth @DAVGtech @DWalmroth…
RT @chr1sa: New car designs coming for our next @DIYRobocars @donkey_car virtual race on the 23rd. Choose any one you want at race time
Le…
Replies
Depends on your local radio frequency requirements,
For Australia, 5.8GHz for video, 2.4GHz for TX, 900Mhz for Telemetry is the best combo,
Look up US requirements or alternatives for these frequencies, I think 900Mhz there is swapped with 433Mhz
Circular Polarised antennas offer better clarity and range for video,
Built in screen is fine, depending on what kind of range you want, if it is long range, spec up the TX & RX consider a tracking patch antenna.
If its close range multi rotor, I would look on BEVRC or FOXTECH for FPV screens and RC mounts that should be fine...
the Emersion RC 600mw TX is pretty good,
Tim