Replies

  • Take a look at the solder joints of those capacitors;cracked. Perhaps the mfgr owes you a refund! Looks like they are trying to hide that defect with HOT MELT GLUE! Pictures on their web site show solder defects too.

  • I fried also once a 4in1. Since then I use an additional capacitor on the power inlet pads 1000uF. Especiall if using 6S the voltage Spikes can destroy the esc. Never had issues afterwards. There are a lot of informations available in youtube i.e. from „drone mash“ about that issue. https://www.youtube.com/watch?v=xLRBl-2egpo

  • she was really unstable with the stock ArduCopter PIDs.

    Thomas Butler said:

    I wonder what caused the frying of the 4-in-1?

  • 3702458319?profile=original3702458376?profile=original3702458232?profile=original

  • Will do. BTW, here's a pic of a toasted Tekko32 that I had attached to a Kakute F4 V2:

    3702458299?profile=original

  • It's funny how this post is from 9/2017. BTW, here's a Kakute F7 all wired up.

    3702457748?profile=original

  • Many of the flight controllers typically associated with Betaflight, iNav, etc, can be flashed to arducopter.  I use a Kakute F7 all-in-one...but there are many others.  All these are FAR smaller and lighter and integrated than the Pixhawk world.  A quick calculation for me is that I saved 175 grams using the Kakute F7 as opposed to a Pixhawk, OSD, power sensor, telemetry, etc etc.

  • The one made by Sky Rocket that`s in the new Sky Viper:

    https://youtu.be/3RdEELDIeVs?t=17m25s

    This is about where Tridge shows the size of the controller board.

  • Moderator

    The Cube http://www.proficnc.com/content/13-pixhawk2

    pixhawk2.1 - Pixhawk2
This reply was deleted.

Activity

DIY Robocars via Twitter
RT @chr1sa: On May 22, we're returning to in-person AI @DIYRobocar racing at @circuitlaunch. The Amazon @awscloud DeepRacer team will be pr…
yesterday
DIY Robocars via Twitter
RT @breadcentric: On my CV: Hobbies: Training bananas to race on tracks #AWSDeepRacer #DeepRacer https://t.co/MKe14hNyux
yesterday
DIY Robocars via Twitter
RT @breadcentric: See how the April AWS DeepRacer races have ended and a couple bits of news: https://blog.deepracing.io/2021/05/09/aws-deepracer-league-2021-update-11-end-of-april-special/ #AWSDeepRacer #Machin…
Monday
DIY Robocars via Twitter
RT @sunilmallya: Representation Learning +Instance Transfer to learn new reward functions along with advantage based filtering of new exper…
Monday
DIY Robocars via Twitter
Apr 27
DIY Robocars via Twitter
Apr 27
DIY Robocars via Twitter
RT @f1tenth: Sliding (autonomously) into the weekend like ... 🤖😎 #f1tenth #robots #AutonomousVehicles @OpenRoboticsOrg @NVIDIAEmbedded @Aut…
Apr 25
DIY Robocars via Twitter
RT @chr1sa: One of the problems with autonomous car racing is that watching software drive is not a very exciting spectator sport. To help…
Apr 25
DIY Robocars via Twitter
RT @SmallpixelCar: Replaced AGX Xavier with @NVIDIAEmbedded Jetson Xavier NX. Now both cars look fast and clean https://t.co/jlcoY2EjZf
Apr 25
DIY Robocars via Twitter
RT @chr1sa: Yesterday we had a record number of competitors (36) in our monthly @DIYRobocars virtual autonomous car race. We kept it going…
Apr 25
DIY Robocars via Twitter
Apr 16
DIY Drones via Twitter
RT @chr1sa: After more than a year of only virtual races, @DIYRobocars returns to the newly renovated @circuitlaunch on May 22 for the resu…
Apr 11
DIY Robocars via Twitter
RT @DAVGtech: And now available with LiDAR 🔥 https://twitter.com/Heavy02011/status/1381137016381964293
Apr 11
DIY Robocars via Twitter
RT @Heavy02011: #VirtualRaceLeague: @DIYRobocars Race #9 - #ParkingLotNerds #thunderhillracetrack, CA Join us for the next race April 24th,…
Apr 11
DIY Robocars via Twitter
RT @DWalmroth: Weather's finally cooperating, looking forward to racing 1:10 scale autonomous cars outdoors again! @diyrobocars, @NVIDIAEm…
Apr 7
DIY Robocars via Twitter
RT @AIDRI_: I finally succeeded in optimizing the trajectory and speed of a car on a #racetrack. Next step: implement a 2d controller and…
Apr 7
More…