Hi All,
I would really appreciate any advise or direction on how to get my Telemetry to work.
I have the following:
APM1
XtreamBee USB Adapter x 2
XtreamBee Board x 2
Xbee Modems-
2 x Xbee Pro 900 (XBP09-XSC)
2 x Xbee Pro 2.4 (S28 Series 2)
I am battling to set this up on either configuration, i have even tried my spare APM1
The wiki does not mention anything on these modems and seems hard to find out how to configure or what to configure on these modems
If there is anyone that can help or guide me i will appreciate it a lot
Thanks,
Kevin
Replies
i tested the 900 as per Ted's device, works thank you but can't adjust pid's so makes it kinda useless :(
So i am back to the 2.4 modems, the models are XBP24BZ7, if anyone has set this up to work please let me know
Thanks,
Kevin
This may help for Series 2 Xbees http://www.diydrones.com/forum/topics/xbee-pro-2-now-working-after-a
This may help for series 1 boards http://www.buildyourowndrone.co.uk/ArduPilot-Xbee-Telemetry-kit-2-4....
Peter