I havnt been on here for a fair while. Still using the APM2 in a diy quadcopter UAV I want to do max range in a plane (UAV). Last time I looked the Techpod was the latest and most talked about kit. Are there any other resonably priced plane kits for
Hi Everyone, I am Kane from Benewake CO,.LTD. It`s about to Chinese National Day. And we got 7 days off. Really nice holiday. To share my happiness with you all, we decide to have a little game about our LiDAR TF-01. Ad Time! Main Features: Detectio
Has anyone worked with the Storm Pro-3 universal gimbal yet, as advertised here? If so, can anyone please point me in the right direction where they did the necessary config for the gimbal?
I presumed that the gimbal controller board is a Storm32
I'm trying to set up an ardurover with a pixhawk. I have a sbus radio R304SB and 4 channel T4PX Transmitter. I plugged the radio reciever into the RC port and all the pixhawk pereferials like gps and telem into their ports.
I'm trying to set up an ardurover with a pixhawk. I have a sbus radio R304SB and 4 channel T4PX Transmitter. I plugged the radio reciever into the RC port and all the pixhawk pereferials like gps and telem into their ports.
I am looking to use drone captured data to map out areas.
I am seeing rolling shutter artifacts from the sensor system I am using. This impacts our photogrammetry and massively degrades the orthomosaic quality. I have seen that Pix4D has a solution
I am looking for an open source option to stitch aerial data (into orthomosaics, point clouds and DEMs) I have noticed that OpenDroneMap is not being maintained. Are there any alternatives, that can be scripted in Python?
I've noticed that when I extract the waypoints in the tlog file and then load them in the MissionPlanner/flightPlan they are slightly different then the waypoints i wrote.
For example, i wrote a single waypoint (see written_waypoint.jpg) and wrote
Would anyone be so kind as to give me a Python example for how one would use MAV_CMD_SET_MESSAGE_INTERVAL to establish an attribute listener and how one would read data from the listener? (e.g., battery, mission plan, airspeed, etc.)
I made a Structure scan: DO_SET_ROI then LOITER TURNS all good and set and works BUT the targeting is off by a 0-15deg in yaw direction. Center of the circle is correct,
hello, can any tell that video transmitted by drone from remote location how should it process for detecting images from it...?? and which algorithm should i prefer or from where should i start..?