Please Help with the solution to resolve this issue.
Error Could not copy the file "D:\MissionPlanner\ExtLibs\AltitudeAngelWings\Keys.config" because it was not found. AltitudeAngelWings
Hi all,
Apologies if this has been tackled somewhere else, I have found similar topics but not this one in particular.
My setup is a Pixhawk + a set of Castle Creations QuadPack 35A + Leopard LC2835-5T motors. My problem is the following: Everything
Read more…There is a known incompatibility issue with Pixhawk FCs and DJI Tuned Propulsion Systems. And I have seen various solutions online in multiple forums, including this one. Problem is, some of those solutions are months and even years old and the info
Read more…I bought a pair of RDF900 radio,but it doesn't work now.Maybe it is burnt out .I want to mend it,but i don't find schematic.I find max2235 and SI1002 datasheet, but i don't know layout.I don't know some components,who can help me?? thank you very muc
Read more…System: 550 Hex, APM2.6 Flight Controller (supposedly with no onboard compass), 3DR GPS, latest Mission Planner, Hexacopter 3.3.1 firmware.
Problem: After calibrating the accelerometers, the compass, the radio, arming then dis-arming the motors, I swi
Read more…I was wondering if I could just wire the UBLOX ( https://www.u-blox.com/en/product/c94-m8p ) to the input of the 3DR brain to get a centimetre accuracy and create a mission with way points to create a light patter with my custom drone.
It sounds a bi
Read more…Hey guys,
Wanted to ask what would be a good and afordable NDVI sensor that can be mounted on the DJI Matrice 600, it would be use for agriculture.
I know the sequoia is a great equipment, but a little expensive for my budget.
Would you have some recom
Read more…The one piece of hardware that I have more trouble with than anything else, besides possibly the internal compass, is the Airspeed sensor.
Trying to find a good location for it that is not easy to damage is nearly impossible. After looking at the new
Read more…Hi there,
I'm trying to get the data of the sensors from a Android Mobile phone to an Arduino, so far it worked for me with a small program, now I want to pack it all in a Mavlink format, do you have any App to do that? +open source of course
Hi everyone ,
I have some questions from this video..
https://www.youtube.com/watch?v=d904Jl0UOdc
I'm not talking about the generation of hydrogen which is the first part of the video but I have some doubts at the last part of the video , He has a cylin
Read more…Does anyone know of a commercial IMU specifically designed for use in UGVs with electric motors? I'm looking for a product that can take into account the transient magnetic fields and that doesn't use GPS to aid the heading solution.
Read more…Hey All,
Does anyone have personal experience with KDE motors? I have two sets of four; one set each of two sizes. The larger size seems to work fine, but the smaller size, 2315 have serious vibration issues. Even balancing them the best I can with th
Read more…Hi, I'm doing some research relating to my first drone, which is a Quanum Nova Pro kit (should arrive any day). One vid I watched mentions calibrating via Mission Planner. How necessary would this be? I am with a macbook, and it seem Mission Planner
Read more…
Hello everyone,
I begin today to make my own drone and I'm a complete novice .
I am reading several tutorials and my choice edge on the manufacture of a drone FPV Racing with a Pixhawk Flight Controller .
I want to make my own chassis in 3D ( at fir
I'm being shot at by a crazy local guy!
I'm flying my small fast 250 size quad over the field at the back of my (UK) house, between 10-30ft in the air, just back and forth in a line.
I think it has happened three times, the first two times I did not fu
Read more…Modern aircraft using Flight Management Systems (FMS) as well as general aviation aircraft using GPS navigation have wind readouts providing actual wind direction and velocity from the aircraft. We are trying to get this data for flight tracking and
Read more…So when I take off in STB everything is fine at mid throttle. But when I switch to Loiter mode the IRIS+ climbs? Any thoughts on if this is a ESC problem or Param problem?
Read more…My quad has had many flawless flights without any issues (100 or so flights).
Recently during a flight, while in stabilise and alt hold, it suddenly pitched forward (maybe more than 45 degrees) and yawed 360 degrees and then recovered. I'm pretty sure
Read more…This used to be the one very annoying issue in mission planner, that the command column was hiding so text and you could not expand manually. The latest version just came out V 1.3.40 build 1.1.6104.19708 which has this part fixed! Many thanks to th
Read more…Hi All,
I decided to build my own pixhawk version and just made compile environment on my mac mini with OS X Yosemite 10.10.5 and followed every instructions described in the ardupilot wiki page.
Now I setup compile environment on Eclipse and successfu
Read more…