- Comment by Alexey Kozin just now
arduplane 2.76 ahrs level correction problem
https://www.youtube.com/watch?v=TEQIo5K9xak&feature=player_embedded
at 3m15s after rtl pressed pitch sensor shows +20degs and above
actual -20deg - plane fly to ground
You need to be a member of diydrones to add comments!
Replies
I found that if you increase AHRS_RP_P param from 0.1 to 0.4 (means ACC more weight in attitude estimation than gyros) mitigates this issue. With AHRS_RP_P = 0.1 APM went out of control during a long 28 degree turn, now in 0.4 I can take long turns without lost of control due pitch wrong estimation. The problem still there, at least is contained...? testing at lower speed with small radio turns APM loose the control again...
Hi guys, I have the same issue regarding bad AHRS pitch estimation due a long turn in FBW-A and Stab. My enviroment: FlightGear + HIL + Mission Planner 1.2.93.
take a look to this video I made:
2 Developers
may be inertial velocity may be better then clean "gps or airspeed" for level corrections ?
/AP_InertialNav/AP_InertialNav.h:
I have similar problem with plane descending with apparent nose up, or loosing altitude in turns because plane thinks nose is pitched up.
Something is not quite right with AP v2.76, we've been flying two X8's, an X5 and a RVJet, all show similar behavior and cannot be trusted.
log file for this video
archive
http://my-files.ru/bnla.logss.rar
log file 2013-12-14 08-14.log
line 14865 mode rtl
pitch up
gps alt down