AUTO TAKEOFF question

HelloHope someone may know answerIf I set up a mission and my first command is Takeoff ,If I take off via manual mode (hand launch)and begin to climb , if I then switch into auto flight mode'.....if I am under the takeoff specified ALT will it still complete the takeoff? Or just fly to first waypoint. I am very familiar with Arducooter and it behaves by completing the takeoffWanted some advice before I switch in flight.Many thanks Jeff

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • I usually fly my plane to mission altitude manually and then switch to auto.

    I'd like to see a "Loiter To Altitude" WP-command in MP.

  • I have not had luck with my X5 in Auto
    X8 is no problem
    I think I was using a prop that was too small for my 1100kv motor on 4S
    I will try with larger prop but it's very easy for me to take off in manual and a few failed attempts in auto

    Thanks Jeff
  • Why you take off in manual and then set it to auto? I allways take off directly in auto (hand launch) and works perfectly.

  • You'll just have to try it and let us know. My guess is that it will stay in takeoff until reaching the altitude.
This reply was deleted.