Dear Friends,
I wanna buy one suitable camera gimbal for my quadcopter and it has to support by the APM2.5. I found some of the gimbals but those are well suit with the DJI controllers but I don't have any DJI controllers. SO please help me to find out some good Gimbals for mt Quad-copter and it has to suit with APM2.5.
Thanks,
Ravi Kishore MV
Replies
Again, it has NOTHING to do with APM. You would do yourself a lot of good to read up on arduino. Tons of stuff on the web including the software that is free.
Firmware loaded SimpleBGC_2_2b2 (works with GUI: SimpleBGC_GUI_2_2b2 http://www.simplebgc.com/files/v10/SimpleBGC_GUI_2_2b2.zip)
If you have the arduino program to control the pitch and roll, can you please send it to me. because I don't have good knowledge in arduino programming. and as shown in photo, is it enough to connect that particular pin to arduino?? actually I planned to order the gimbal for my quad as shown in the photo.
Thanks in Advance
I need the one which I can control the pitch and roll from my APM2.5. Because for my FPV I have to capture videos in different angles. MARK can you please tell me the procedure how to control pitch n roll using the transmitter (Im using futaba T8J transmitter).
what ever the gimbals you have listed below are too costly and they are out of my budget and they are bigger in size. Right now i have DJI f550 Flame wheel so i need a gimbal that fits to my hexcopter. Thanks in advance.
Anything but DJI will work with APM with separate stabilizer or using the APM for stabilization (with brushless controller if applicable).
jz