Recently, I was asked to shoot some stills and footage of a sportfishing yacht for a client. We went out on a beautiful morning with no wind and an almost perfectly calm ocean. If you wanted optimal conditions, its wasn't going to get much better than that morning.
I connected the battery to my custom built quadcopter running APM 2.6. It would not arm. We were sitting about 4 miles off shore, not moving, gently rocking on an ocean about as calm as I've seen it. I was trying to launch from the middle of the lowest platform of the boat, at the stern. I had good GPS. Everything else checked out. It would not arm.
As soon as I got back to dry land, I tried it again. It armed without hesitation. Apparently Arducopter needs to be on solid ground to initialize. So what next?
In doing my research, I found this thread:
Chris Anderson says, "Starting with 3.3, calibration on a moving surface will be easier. As far as the gimbal goes, it depends on the make. The 3DR Solo gimbal will calibrate on a boat, but not all will"
I have two points here. First, the gimbal is not an issue for me. Simple BGC lets you turn off the startup accelerometer calibration. It still works fine if you don't let it calibrate every time. Second, I'm using APM 2.6 so I'll have to upgrade to Pixhawk if I want to use Arducopter 3.3.
Arm on Shore first
Next, I found this thread:
The first person to comment boots his quad on shore, then takes it powered up, in his kayak. I see where that could work but that only gives me the use of one battery.
Bring a Laptop?
Considering the idea of calibrating on shore, what if I brought my laptop on the boat with me? I could power up on shore then launch from the boat and fly the first battery. After I return to the boat, I could connect APM to the laptop with USB, then disconnect and swap the flight battery for a fresh one. Would this work? I will do some experiments and post the results on this thread.
Dynamic RTL is a Separate Issue
I've already posted the desire for Dynamic RTL, where the copter returns to YOU instead of the original launch location. Obviously this is desirable for any mission launched from a boat. It seems like a much easier feature to add. The Tower app already knows your GPS location in order to do "follow me" mode. The DJI Inspire already has this feature. My thread is here:
I will post more information as I find it. Hopefully this thread will be a resource for those wanting this feature.