Built my own octo frame,,got the good gps and the 900 tele,, had this thing flying in the back room getting my trims in and had her stable,,,alls good,,, got busy hooking my extra channels ,7,8,all was going good was looking at the mp terminal got done with 7 pluged in 8 and nothing all channels went dead, re bind with rx no go no blue light ,, I loaded the f/w a few times,, still nothing I loaded it with all the inputs out and with just four in nothing I get nothing usb other than able to write to it and my tele is working but nothing on the mp can somebody point to the right thread I so new at the this Im not even real good at finding good info Thanks ahead of time
You need to be a member of diydrones to add comments!
Replies
Hey Emory,
If I am understanding you correctly, it sounds like you are fine when you have up to channel 7 plugged into your board? When you add the 8th nothing turns on? No sounds, no lights?
HI Emory,
It would be nicer if you could write it in points rather and display your problem with picture (if possible). Looks very confusing to grasp your problem right away!
Just a suggestion so that you can get more people interested in the open forum;) All the best!
Regards..