I have bought a tarot 680 pro (hexacopter), pixhawk and r70008 futaba receiver.
So the firmware compatible to my hardware is hexacopter X Arducopter 3.2.
After connecting all device, i calibrate the radio, compass, mag, esc, etc. Everything is ok. Test the motor and the rotation (ok).
However when i test without props in stabilize mode i have a problem. The values send to the escs are very unstable. Only change the throttle the values are very different (radio 1= 1120, radio 2= 1310). I believe the controller dont generate the motors values correctly.
When i test with props i cant fly (only crash without damage).
Anyone have this problem? i have change the pid, calibration again, fix the controller,