Comments

• 

  Patrick Poirier June 14, 2016 at 12:25pm

  Confirmed, had multiple issues with Banggood MS5611.

  All of them could work on IIC but not on SPI, looking with a microscope it seem quite obvious that there is a quality problem related to the reflow of the MS5611 itself : Solder joints are missing under the chip pin (and oubviously all SPI related).  I reworked 3 of them with a hot air station (Remove chip - repaste - resolder - reinstall and reflow) and they are OK now.

  PS , I asked Banggood  to be credited for these faulty modules and they did. My guess is that they are just testing these with IIC so they are flooding the market with non working  SPI unit...

  Bonne Chance ;-)
• 

  Mirko Denecke June 14, 2016 at 12:00pm

  @Philippe

  I has this issue with faulty MS5611 modules.

  Regards

  Mirko
• Anemos Technologies June 14, 2016 at 10:27am

  Hello, I had to close to the selling as after testing we had a problem with the ms5611 module, the code said "Can't read PROM"

  when connecting this module alone on an arduino, it seems to work with IIC.

  We need to check those modules alone with the BBB without the BBBmini
• Anemos Technologies June 14, 2016 at 12:28am

  Hello,

  Thanks Mirko

  here is the purchase link : http://www.ebay.fr/itm/FULLY-ASSEMBLED-RTF-BBB-MINI-FLIGHT-CONTROLL...

  I don't know why, but the item is not visible on ebay.com

  We will definitly not earn a lot of money with those boards as they were mainly be build for internally use. But if the selling is profitable, sure we will give something back for this awesome work.

  The BBB arm board is far better than raspberry pi in a GPIO interrupt driven processes perspective.

  Sincerely,

  Philippe Crochat

  Anemos Technologies
• Ivan Vuletich June 13, 2016 at 4:18pm

  I'd be interested in either a kit or a ready soldered BBBMINI board.
• 

  Mirko Denecke June 13, 2016 at 1:04pm

  @Anemos Technologies

  I think you can post the purchase link here. But don't forget to give something back, when you earn a lot of money with that kit ;-).
• Anemos Technologies June 13, 2016 at 4:08am

  Hello, We have just made a batch of 30 ready to use, already soldered BBBmini boards. If that does interest someone and if the group owner allows it, we can provide a purchase link here.

  Philippe Crochat

  CEO of Anemos Technologies

  

  Home Page
• Admin

  Thomas J Coyle III May 11, 2016 at 1:16pm

  Hi All,

  Linus, myself, and Rusty from BR have finally got the BBBMINI v1.4 working well with the latest ArduSub software for a Vectored six Thruster ROV Chassis.

  My latest ROV Project discussion post can be seen here.

  Regards,

  Tom C AVD
• 

  Mirko Denecke April 17, 2016 at 12:28pm

  I am happy to announce that my DIY project BBBmini won Third Prize in The SeeedStudio BeagleBone Green IoT Contest. 

  http://diydrones.com/profiles/blogs/bbbmini-won-third-prize-in-the-...

  

  mirkix/BBBMINI

  BeagleBone ArduPilot DIY Cape . Contribute to mirkix/BBBMINI development by creating an account on GitHub.
• 

  Jiro Hattori April 15, 2016 at 3:27pm

  "Flying BeagleBone Green" is very nice instructions as always by Mirko.

  

  Flying BeagleBone Green

  BBBmini is a state of the art Linux autopilot / flightcontroller Cape for the BeagleBone. It can be used for Copter, Planes or Rovers. By Mirko Dene…