Iris triggering Sony QX1 w/ CAMremote-2A

Hey I'm back with a much needed update.
It's possible to trigger the Sony QX1 mirrorless lens-camera w/o using API calls to from the Remote SDK.

Think of this solution as a the good old analog way w/o out all the bells and whistles of using the came

Where can I find Iris+ motors?

I crashed my Iris+ into my right hand. Broken motor. 15 stitches in right hand. Where can I find replacement motors, and could anyone provide me a link for a guide for replacing the motor. I'm looking for a back left (as you are looking at the LED, C

looking for a camera that has a zoom and av-out features

I'm looking for a camera that has a zoom feature which I can control with iris radio. And an AV-out that can feed into a video transmitter (fpv transmitter)

I'm ready to drop 3DR, go with DJI

Alright, this time I'll try to whine and complain a little less, but I think this is it.  After replacing gimbal after gimbal, broken arm after broken arm (are they always the blue ones that break?), watching my Iris drop dead from the sky time after

drone-kit Python is not connecting with Iris+

I'm trying to build my first dronekit python program, and I'm doing some tests with some examples but I couldn't connect to my UAV(Iris+). I plugged the usb radio(3DR 915 MHz) and I put vehicle = connect('/dev/ttyUSB0', wait_ready=True). Actually I h

RC Transmitter beeps non-stop

I need your help guys.

Description:

I never fly in auto mode making the route at my laptop with usb antenna.

Last weekend i tried and it was fail one. Iris+ started mission well but during the mission i scared to lost it and swithed to loiter mode to la

Shooting Minature Fake Video from an Iris+

Iris+ community- here is my first test of "Miniature faking using a Canon P&S camera running CHDK & KAP-UAV script". Camera mounted on my Iris+ quadcopter's hard-mount & hovering in LOITER 160 feet above ground.

Youtube Video

 There were some gremlins

Tarrot gimbal screws lost - where to find

Hello,

During one of my flights I've lost one of 2 screws which holds go pro attached to tarot gimbal. Is there any place I can buy it or probably somebody knows a part number to search for on the internet?

Thank you,

Roman

Setting up Channel 8 from the Iris RC xmitter to do a camera trigger

OK, so I've got the Channel 8 assigned in the Pixhawk parameters to perform a camera trigger. But, it would seem that channel 8 is not assigned to any switch on the Iris FSTH9X rc xmitter.

any suggestions on how to assign channel 8 to say the "Gear" s

Iris+ parts

Although I was able to sell the drone, I still have some iris+ parts for sale: 

4 pairs of new props

3 arms (2 black and 1 blue)

1 set of long legs - used

1 set of short legs - new

1 go pro silver

1 fpv black pearl kit with sun shade - only used a couple o

How to modify the Iris+ firmware: eclipse errors and more

Hi,

Sony Action Cam setup for FPV - need ideas for better video xmitter mounting

Iris Forum-

I've been wanting to setup my Sony Action Cam (HDR AS-100V) on my Iris+ and use it as an FPV trainer. I've mounted the camera, inverted, off the front mount, and attached the video xmitter per Colin Guinn's setup video. But I've never like

Iris+ Compass Issue

My Iris+ is still recovering from a serious failure where it plummeted 50m onto rocks on a coastal reef back in September 2015. Three of the four arms were broken as well as top and bottom shell, motors, props, legs, FRsky receiver and other bits inc

Suggestion for solvation of the lack of spare parts problem

where can I get iris+ spare motor, props and arm?

Dear all, I went to 3DR site and most items are tag with out of stock or discontinue, can anyone advise how can I still purchase, many thanks

Discovery Buzzer

I am trying to add a discovery buzzer to my Iris+, it is a receiver type, I am very new to the hobby. I have done many searches to find out how. I don't understand. how to program the transmitter for the switch I want to use and the receiver channel

iris+ suddenly started to fall from 80m high and crashed

Hi 

Yesterday I was flying normally and switching between ALT HOLD and LOITER mode back and forth during the mission. 

At the last moment I was at 80m high and was trying to come back, so I switched to ALT HOLD and cut the throttle all the way down. 

It

Any Learning configuration of Iris+ (Asia)

Dear All...

I am trying to learn Iris+ more since I have just got my system from a friend.

Any chance of anyone in SouthEast Asia that can discuss with me...

I will have 1 week leave from work for this year and I can travel to your place, currently i am

3d printed props

Has anyone had success 3d printing propellers?  I am about to start designing a propeller I can print on my reprap printer and wondered if I am re-inventing the wheel...  I haven't found anything suitable for the Iris on Thingiverse  or other similar

Nose orientation is at an angle

After calibrating the compass. My Iris flies with the nose pointed to the right . any ideas how to correct 

Im a newbie . However I think I can present the logs if necessary. Thanks for any tips or resolutions

Thanks