Comments

• 

  Shyam Balasubramanian August 12, 2013 at 5:35pm

  @Janelle,

  It doesn't work that way with ArduPlane codebase. Serial Monitor is meant for data with USB attached at 115200bps baud rate. With telemetry, it is only restricted for data in flight (e.g. via MavLINK) and you will see some junk values when using Telemetry. You can change the code however, to display the result on the serial monitor with Telemetry, but I will not do that if it were me.
• 

  Janelle August 12, 2013 at 5:16pm

  Hey, I was hoping someone could give me some advice. I've been using the arduplane code within arduino and its been working well. However, when I try to see the sensor outputs through serial monitor it doesnt work through telemetry. we've tried adjusting the baud rate to no avail. Any help or direction would be greatly appreciated.
• 

  Anderl July 11, 2013 at 5:32am

  @Randy,

  I figured, since I read

  "Building for ArduPilot Mega 2.x
  Excluding arduino core from include paths
  Excluding arduino core from link"

  during compiling process.

  What a pity!

  Thanks for your answer
• Developer

  Randy July 11, 2013 at 5:03am

  @Anderl re "is it possible to upload AC-3.0.1 using standard arduino?" I'm afraid the answer is 'no'.  The reason is that between 2.9.1b and 3.0.1 we added the hardware-abstraction-layer in order to be able to run the same code on the PX4.  The standard Arduino IDE can't deal with HAL so we had to make a modified version.
• 

  Anderl July 11, 2013 at 4:21am

  Hi all,

  Till Arducopter V2.9.1 I was able to programming my APM2.5 using Arduino IDE (standard Arduino IDE 1.0.1, not Arduino IDE for Arducopter). It was necessary to edit the APM_Config file by adding "#define CONFIG_APM_HARDWARE APM_HARDWARE_APM2". But yet, ab V3.0 I'm unable to compile the code. Now, to achieve this, I have to use necessarily the Arduino IDE for arducopter and select the appropiate HAL board.

  Question: There is a way to program the APM 2.5 using the standard Arduino IDE? If yes, how should I proceed to specify in code which board is going to be programmed? (CONFIG_HAL_BOARD == HAL_BOARD_APM2)?

  Thank you all.
• MR60

  Forrest Frantz June 22, 2013 at 10:07am

  Wiki on Custom Code.  I've moved this conversation to the following 

  http://diydrones.com/group/learning-to-program-the-ardupilot-mega/f...
• 

  Gabriel Garcia June 22, 2013 at 2:20am

  Hi Forrest,

  It sounds really nice. Is there a draft version?

  I miss, so I would include if possible, an additional point for SITL.

  I´m fighting now with SITL installation and config, and is not too clear how to configure and run it. 

  cheers, 
• MR60

  Forrest Frantz June 21, 2013 at 12:37pm

  Rick Calder and I have been working on a Wiki for the Windows environment showing how to:

  • Creating a workspace
  • Download the code
  • Download the compiler
  • Configure the compiler
  • Familiarizing yourself with the code
  • An example of modifying octa files for custom frame layouts
  • Verify the code
  • Compile and upload the code
  • Maintain custom code when updates occur

  If someone wants to help, let us know how you would like to help.
• 

  Gary McCray June 21, 2013 at 11:14am

  Really great concept for a group guys,

  Seems to me that one thing that is badly needed is a really good Developer wiki page on the basics of exactly how to do this.

  Basically a really straightforward walk through showing step by step how to use Git to properly clone the firmware source, How to install and set up the developer environment, edit, compile and build the source, load the firmware object and finally how to interact with the developer group to get it into shape for submission as a possible inclusion in the user code.

  At one time it was fairly simple to do this, but it has gotten more complicated and I think is screaming for a really good shiny new wiki page that covers this well enough so that your 5 year old (well maybe not) could do it.

  Also like to see it for PX4 and trying to get together something like it with Dennis Spanogle for Mission Planner right now.

  Anybody with actual experience, I would be happy to work with you to get this in the Wiki, contact me from my Avatar.
• 

  Gabriel Garcia April 26, 2013 at 1:22pm

  I'm also interested.

  cheers