Hello. Question about UBX format. How configure

Posted by Artem Kholodkov on March 10, 2015 at 12:35am

Hello,

Have my Pixhawk with ArduPlane and gps neo-n8m. After every start Pixhawk logs his trajectory to card in .bin format. try something to change in mission planner but it still logs in bin. Can I somehow configure Pixhawk save also u-blox format (.ubx). Can i configure that in mission planner or may be in u-center.

Thanks a lot for answers.

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • Klaus Heinrich March 10, 2015 at 12:48am

    Hi Artem,

    for what you need the u-blox format (.ubx)?

    best Regards from Germany

    ciao Klaus

    • Artem Kholodkov > Klaus Heinrich March 10, 2015 at 1:07am

      Hi, I what to postprocess trajectory with reference stations to improve accuracy of trajectory.

      Regards

      Artem

    • Klaus Heinrich > Artem Kholodkov March 10, 2015 at 3:43am

      This program is actually pretty good :)

      http://copter.ardupilot.com/wiki/common-mission-planner-telemetry-l...

    • Artem Kholodkov > Klaus Heinrich March 10, 2015 at 4:20am

      ok, that is good software to analise trajectory, but i can to do nothing with it. You must didnt figure out what I mean under "reference station" . I mean to use raw GPS data from another receiver and to improve accuracy of my receiver track used DGPS method. That why i have to use ubx files. I cant convert .bin files into RINEX, and ubx i can.

    • Klaus Heinrich > Artem Kholodkov March 10, 2015 at 4:42am

      Entschuldigung,

      http://open-source-gps-related-discussion-and-support.1099874.n2.na...

      Open Source GPS-related discussion and support - convert ubx 6T to rinex
      convert ubx 6T to rinex. hi , could anyone explain how can i convert my ubx 6T file to rinex. is rtklib can only convert ubx from U-Blox LEA 4T? ____…
This reply was deleted.