Clifton Hipsher's Discussions (198)

Discussions Replied To (71) Replies Latest Activity

"You have the cable miss-wired.  The Yellow wire should be one slot over so that goin…"

Clifton Hipsher replied May 26, 2018 to Pixhawk is not sending chanels into QGroundControl

8 May 28, 2018
Reply by Tom

"Sure the Pixhawk could be bad, but I have doubts about that which is why I'm focused…"

Clifton Hipsher replied May 25, 2018 to Pixhawk is not sending chanels into QGroundControl

8 May 28, 2018
Reply by Tom

"Pixhawk should be fine with either S.Bus or CPPM, so either you have the input cable…"

Clifton Hipsher replied May 23, 2018 to Pixhawk is not sending chanels into QGroundControl

8 May 28, 2018
Reply by Tom

"What radio and receiver are you using?"

Clifton Hipsher replied May 23, 2018 to Pixhawk is not sending chanels into QGroundControl

8 May 28, 2018
Reply by Tom

"It was fine before what happened?"

Clifton Hipsher replied Mar 25, 2018 to RESOLVED: Uncontrollable in-flight yaw (it was fine before)

3 Mar 25, 2018
Reply by Glenn Hollowell

"I don't know what brand/type of ESCs you use, but every ESC I have has an LVC.  I us…"

Clifton Hipsher replied Feb 18, 2018 to Lipo Battery Cut off System

5 Feb 19, 2018
Reply by iSkyMaster

"Doesn't sound like  good idea to me.  Why would you want a device to cut power while…"

Clifton Hipsher replied Feb 18, 2018 to Lipo Battery Cut off System

5 Feb 19, 2018
Reply by iSkyMaster

"GS software (Ground Station/Ground Control Station) is Mission Planner, qGround Cont…"

Clifton Hipsher replied Feb 11, 2018 to Flashing Pixhawk 2.4.8

6 Feb 11, 2018
Reply by iSkyMaster

"Did this Pixhawk ever work properly?"

Clifton Hipsher replied Feb 9, 2018 to Flashing Pixhawk 2.4.8

6 Feb 11, 2018
Reply by iSkyMaster

"It also depends on the ESC.  True optically isolated ESCs MUST have the + lead to su…"

Clifton Hipsher replied Feb 7, 2018 to Cutting the (+) wire on ESC Pixhawk data leads...is anyone doing this?

6 Feb 16, 2018
Reply by iSkyMaster

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service