NECESITO AYUDA PARA INSTALAR EN EL PIXHAWK, SE INSTALA EL FIRMWARE ARDU PLANE V3.8.4, PARA LA CONFIGURACION GUIADA (WIZAR), SE ABRE LA PANTALLA DE DRONE Y NO DEL AVION PARA SU CONFIGURACION.
HE INTENTADO DEL MODO MANUAL PERO ME SALE LO QUE ESTA EN LA
Read more…Does anyone know where can I buy the power cable to connect the Pixracer power port to ACSP4 power module directly?
The cables I received with Pixracer and the ACSP4 module has one connector that can plug in properly but the other end has different st
Read more…I am Gene S.
I am putting together ( S-500 ) carbon fiber Drone My first do-it self, I got a Pixhawk GPS SE 100 kit., A DragonRider Dark, FPV Tranmitter 5.8GHz. 40 Ch.+ 2 5.8 Antennas Set. + I have 90% of the mounts wires, Will one you know more I
Read more…Last Updated: Sep 19th, 2018 - I will be updating my original post as people correct me and I learn new things.
Well, I am next off to monkey around with LIDAR technology and interestingly there is not one single document available that can explain d
The PixHawk along with Mission planner allows us to set battery thresholds and we can make a Quad or plane to do RTL, land etc. if the battery voltage drops below predefined thresholds.
I am wondering if there is an external battery cut of a system th
Read more…I have a Pixhawk 2.4.8 which is acting weird. When I simply plug into any USB port to power it up, it just beeps non stop.
I believe the firmware is corrupted.
Mission Planner will not connect to it so I can flash the firmware.
Is there any other progra
Read more…Hello!
I need advice on the counter Pixhawk. Or opinion - can someone already did.
My controller, which I use in my project (https://flying-bike2018.com/home/), from the RC-helicopter DJI Ace One, but it does not allow you to turn on the spot. But has
Recently I've come across the suggestion that when you are using the Pixhawk power module, you should snip the (+) wire (middle one) that connects the ESC to the Pixhawk unless you are using a Zener diode in the line to prevent over-voltage. I've got
Read more…I had purchased the PIX and discovered on maiden flight there were issues with the gps. I did not trust the module , so I removed the PIX and replaced with other , That was about 3 years ago. My question, is there anyone out there that repairs/troubl
Read more…Hello anyone, I am trying to start a drone Proyect with a pixhawk, I have an issue with arming the drone I have a memory corrupted message
some help wil be aprecited
Read more…Hi
I am building a 1300mm octocopter with 30AH lipo. I want to be using a tegra tx1 for onboard visual processing coming from a sony a6000.
I have built the drone and assembled it. I have configured it as usual. I was using the external compass on the
Read more…I have just acquired an Iris 2, and was wondering what's the latest firmware I can use on this platform, or, can it use all the latest firmware updates? Also what mods are now available for it or should I look into?
Read more…hi all ,, when im going and fly and when im landing and go home , i wont to know how much altitude im reach from log files on mission planner , anyone know how to got these from log files ????
Read more…Hi all,
Do you have any experience flying with dangerous Kp index (above 5 I would say) WITHOUT using GPS, so in Alt Hold or Stabilize?
Is it safe to fly with strong solar storms if I exclude GPS and possibly magnetometer?
I both use APM or PX4.
Read more…I am new to the Pixhawk flight controller and the use of mission planner. I have built several multirotor's using clean flight or beta flight. With either one of them there is a simple checkbox to change your channel map.
I am using a lemon 8 Channel
Read more…Hello - I'm currently testing my first Pixhawk hexacopter build. I attempted to fly a waypoint mission yesterday that was a huge fail. When I initiated auto takeoff the unit lifted about 3 feet, flew 6 feet forward and nosedived int the ground. I hav
Read more…Hey Guys
I'm just starting out, so bear with me.
I am trying to find a complete parameter list for the data Pixhawk puts into it's tlog files, specifically what each of the variable names is. I've found plenty of Pixhawk parameter lists, but none tha
Read more…Can the PIXHAWK be programmed to do specific flight routines? I am curious about flipping a quad or hex and then flying inverted by simply issuing a single command. (I am just a curious guy.)
Read more…Hay Guys...
I am using Pixhawk with 3.3.3 quad. We use factory PID values. The first flight was in POS HOLD mode at an altitude of 7 meters. There was a slight wobble and jerk in the quad. We flew for about 4 mins. The next flight was the same POSHOL
