A group for those of us with the X-UAV Talon and Mini-Talon

165 Members
Join Us!

You need to be a member of diydrones to add comments!

Join diydrones

Comments are closed.

Comments

  • How good is your Talon when dealing with altitude ?

    I'm running some tests with my Talon to understand how well the target altitude at waypoints is reached and maintained as well as during Loiter mode.

    This is how my Talon do in Loiter with some 3 m/s wind, as you can see the altitude since the beginning is not well hold.
    Do not know if is my plane or TECS algorithm

    3702420180?profile=original

    When Loiter was engaged plane was at 27,790 meters but it went to 36,5 meters and then the altitude delta was  11,91 meters, really a lot .

    So is it my Talon or the TECS ?

  • Hi All,

    this photograph shall help those fly the talon in high wind conditions:3702405747?profile=original3702405672?profile=original3702405757?profile=original

  • hi 

    i like to buy X-UAV Talon and Mini-Talon plz contact me 

  • hi 

    i like to buy X-UAV Talon and Mini-Talon plz contact me 

  • Anyone running the Talon Max and have any comments

  • Hi Aaron, mine is flying with wing extentions......

  • Gustav - great info below and certainly points me in the right direction, in terms of hardware, any changes recommended if you were to use wing extensions? I'm looking for a commercial mapping solution so interested in yr thoughts
  • Although I've done zero flying myself lately, I've had to assist a friend with his Talon.

    I attach my revised document, and original param file.

    Hope it helps......

    GustavTalon20140420.param

    Pixhawk.param

    XUAVTalonSetup-1.doc

    https://storage.ning.com/topology/rest/1.0/file/get/3701713763?profile=original
  • Sounds dangerous, I have not had that kind of issue.

    Sure, not electrical problem?

  • Hi all

    By changing to any mode the Pixhawk turn the engine off even in flight.

    Can help solve this issue! I'm getting crazy trying to change parameters.

    ~thanks

This reply was deleted.

auto grid mission with my talon

Hi friends,Can anyone help my to fix this problem regarding strange and unuseful turns on grid mode (just turns on South part) versus the northern that seem to be fine?thank you.The plane ia a TALON with extended wings. L1 NAV 15, dumping 0,80.

Read more…
3 Replies

Pixhawk Mini and Spektrum Controller

Hi friends,I'm currently trying to integrate a pixhawk into my XUAV talon that I have built for aerial photography. This is going to be my first time using a pixhawk on a plan rather than a copter drone so I'm a bit lost. First, I noticed that in qgroundcontrol when setting up my pixhawk, there is no profile for the talon's v-tail design, is there a guide on here or someone who would be able to help me download or setup a profile in qgroundcontrol that would be appropriate for the talon?Second,…

Read more…
6 Replies

X-UAV Build

Hi all,I'm looking for an airframe that will ultimately be aimed at mapping/orthomosaic type projects and the Talon is one we are certainly interested in.I know this has probably been asked 100 times, but does anyone have any information or could point me to links of existing threads that outline a good build and components that work well with the talon.I'm in Australia so pretty sure there won't be much available here in country so will be looking abroad to build the kit.Are the wing…

Read more…
7 Replies

Quadcopter with Saitek Joystick X56 + Scherrer Tx700 Pro + Rx700 LR +PSU

Hellocan Someone help to connect Saitek Joystick X56 + Scherrer Tx700 Pro + Rx700 LR +PSUin order to fly a quadcopter ?And if it is impossibleHow to connect the TX700 Pro and the Quanum V52 Ground Control System, please? https://hobbyking.com/en_us/winbox-ground-control-system-v52.html https://hobbyking.com/en_us/rx700lr-psu-reseller.html https://hobbyking.com/en_us/tx700-pro-reseller.htmlThanks

Read more…
0 Replies