Gender
Male
About
Location
Seoul
About Me:
404 Warehouse is a small project group with new thoughts and insights. We move things in our mind to our hands.
Please tell us a bit about your UAV interest
We are interested in the perspective that UAVs have a connectivity as well as a autonomous actions. We think this changes the perspective of what the object itself actually is.
Hometown:
Seoul
Activity Feed
We are developing a system that controls a Pixhawk powered quadrotor using an offboard ground station with position estimation using motion capture system(Vicon)I am trying to use PCTx(from Endurance RC) on my Turnigy 9X to control the quadrotor…
"Is it possible to get more information of the remote?
I will love to able to build one!"
I will love to able to build one!"
Cansats are a can size satellite used for educating students to teach how to design and implement systems. Cansats are launched in small rockets which drop the cansat in around 100m ~ 3km altitude. From deployment and operation of the satellite is…
"I did looking in to it but no clue for the question I am asking"
Hi,I am trying to implement the SET_ROLL_PITCH_YAW_THRUST mavlink command to control a quadrotor that has an APM onboard. Currently the system I am using uses a Linux system running a C++code to control Asc humming bird and access VICON data. The…
"Ankur, Thank you for the insight.
I suppose some modification to the low level control should be made...
Will there be any references for the effect of the mixing angular velocity errors between the x/y directions and the z axis?"
I suppose some modification to the low level control should be made...
Will there be any references for the effect of the mixing angular velocity errors between the x/y directions and the z axis?"
"Oh, I am using the Arducopter!"
I have been developing a flight mode for the quadcopter to stabilize on a constant yaw rate. This is to have a flight mode which can simultaneously scan and localize inddor environments or outdoor landmarks while mounting the lidar/camera sensors…
We are tring to build a FPV Rover combining a logitech racing wheel with an RC Car for an FPV platform.However we are having some problems with the latency and tracking of the steering wheel input. - I have checked the RC inputs using MAVlink and…
Project OverviewThis project was done to understand the basic idea of first-person-view (FPV). FPV can be referred to as remote-person view (RPV), or simply video piloting. FPV has become popular recently in the radio control hobby…
"Ah, PCB yagi might be a very good idea! should try out :) thank you Julien never thought of the idea using a PCB yagi"
"Julien, you made a good point. We should try out wave signals. As the performance of the vision was disappointing.
On the initial stage of the project, we wanted to reduce the additional payload as possible, as weight is important for flight time.…"
On the initial stage of the project, we wanted to reduce the additional payload as possible, as weight is important for flight time.…"
The Vision Guidance Filming Drone is a research project to study the possibility of an application of a general use of an autonomous flying quadcopter.Sanghyun Hong, Electrical Engineering, Seoul National UniversityJaemin Cho, Electrical…
