"First video of the Immersion RC EzUHF RSSI & Link Quality on a MinimOSD.
The RSSI value is from 0-100 with 0 best and 100 worst and Link Quality is in % 100% best and 0% worst. Just like the EzOSD.
Now I'm using channel 5 and 6 from RX and APM in…"
I was looking to do the coding myself for the EzUHF RX RSSI & Link Quality output, because I thought it wouldn't be that hard to display ch 6 and 7 in % like I said here
But it took me 4 days to find out how to download the sourcecode from…"
I have an EzUHF receiver which has a RSSI needle and a Link Quality needle.You can assign these needles to particular channels on the EzUHF RX, with the software that comes with it. I set it to channel 6 & 7These values are not voltages…"
"Boutrate is max: 115200 (most of the time)
Here is my apm_config.h
// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
// This file is just a placeholder for your configuration file. If you wish to change any of the setup…"
"Ok, I got this to work.
But my numbers and symbols on the screen are flickering wild and disappearing. I see this a little on the video's above, but here it's really extreme.
Could it have to do that I used the 2.1 firmware in stead of the 2.012 ?…"
Yesterday I was experimenting with the Remzibi's OSD and my ardupilot Mega.Everything went fine, I was very happy with it. But then disaster strikes. I don't now exactly what I did wrong but it must be something serious because I fried my oilpan.As…
Yesterday I made a flight: Setup 2 waypoints: 2.3km from home and 300m in between. But airplane fly's 1.5 km towards waypoint 1, comes back to launch, fly's 1.5 km towards waypoint 2 and comes back to launch.Very strange, there's also a very strange…