Gender
Male
About
Location
Milan
About Me:
3DR Pixhawk with Arducopter 3.3 Seagull #REC to control camera from GCS Sony RX-100 IV camera Walkera G-3S gimbal Tarot X960 frame Taranis TX with X8R RX
Please tell us a bit about your UAV interest
Flying, land and boat unmanned systems rocks.
Hometown:
Italy
Activity Feed
"I hoped there was a more automated mode, but I will try to follow this advice. Thanks.
Please consider to add this feature in the future."
Please consider to add this feature in the future."
"Hi Janis,
thank you for your reply. I know the facade scan tool, but our subject is a wind turbine, hence must be surveyed through circular orbits around the tower, increasing altitude AGL as soon as we complete a circle. This until the full…"
thank you for your reply. I know the facade scan tool, but our subject is a wind turbine, hence must be surveyed through circular orbits around the tower, increasing altitude AGL as soon as we complete a circle. This until the full…"
Hello,what's the easiest way to plan a vertical orbit scan of a wind turbine?We need to build a 3D model of a turbine for study purposes, we are aware of the orbit mode, but we cannot find an easy way to extend the photogrammetry vertically to cover…
"Hello Alexey,
I think he means a cone, with a bottom (if viewed in ortho plan) single waypoint, and several upper waypoints which spread over an arc. Alexey Dobrovolskiy said:
Hi,
I don't get. Could you post some sketch?"
I think he means a cone, with a bottom (if viewed in ortho plan) single waypoint, and several upper waypoints which spread over an arc. Alexey Dobrovolskiy said:
Hi,
I don't get. Could you post some sketch?"
"Good informations, thanks.
I will try to follow your advice. Cheaw Wen Guey said:
If you connect the base unit to the DJI assistant 2 you would be able to input the Long, Lat and Alt of the unit. The problem is that the antenna has an offset…"
I will try to follow your advice. Cheaw Wen Guey said:
If you connect the base unit to the DJI assistant 2 you would be able to input the Long, Lat and Alt of the unit. The problem is that the antenna has an offset…"
Hello,Using a M210 RTK, is it possible to add the correction of the base position of DJI RTK differential antenna?We use a GNSS NMEA base antenna to verify the DJI base error. We would insert this difference in order to save the right data on the…
"Hi,
Thanks Alexei. I look forward to try the new features. Alexei Yankelevich said:
Hi,
In UgCS 3.0 there is no special tool so far to build vertical survey grid. Now waypoints can be used to build the path along with constant heading specified to…"
Thanks Alexei. I look forward to try the new features. Alexei Yankelevich said:
Hi,
In UgCS 3.0 there is no special tool so far to build vertical survey grid. Now waypoints can be used to build the path along with constant heading specified to…"
Hi all,We are under trial with UgCS and we're looking for a way to plan a vertical survey (like on a facade of a building or a rock cliff).Is there any ideal procedure to plan it?Thanks.
"Thanks Alexey,
It seems more practical to hold the mission and change the first point manually. I don't like too many waypoints. Alexey Dobrovolskiy said:
Hi,
basically everything the same - you need to change first point for new flight manually.…"
It seems more practical to hold the mission and change the first point manually. I don't like too many waypoints. Alexey Dobrovolskiy said:
Hi,
basically everything the same - you need to change first point for new flight manually.…"
"Hi all, any news about this matter?"
"Thanks for your answer. Craig said:
using positive numbers solved the issue. I'm guessing this will be a problem if you top mount a gimbal, and doesn't seem to match the documentation from the SDK for other gimbals. "
using positive numbers solved the issue. I'm guessing this will be a problem if you top mount a gimbal, and doesn't seem to match the documentation from the SDK for other gimbals. "
"HI Craig, did you solve it?"
"Thanks, I'm going to check them now. Vavooon said:
There are also BattGo batteries."
There are also BattGo batteries."
"Thanks Andre,
do you have any suggestion besides Tattu Smart LiPos? We are also looking for a compact solution, that’s why we liked DJI."
do you have any suggestion besides Tattu Smart LiPos? We are also looking for a compact solution, that’s why we liked DJI."
Hello,I would use the DJI smart batteries (i.e. The ones used with the M600 Pro, TB47S) in order to have higher density batteries and a smart chip to discharge them after x days.I know these guys from Italy achieved it, don't know if they used…
"Thanks Clifton for your confirmation.
Clifton Hipsher said:
You cannot fly in Loiter, or ANY GPS dependent flight mode with out valid GPS and compass data.
If the Kp index is "high" flying in a GPS mode would be foolish.
As for solar storms, if…"
Clifton Hipsher said:
You cannot fly in Loiter, or ANY GPS dependent flight mode with out valid GPS and compass data.
If the Kp index is "high" flying in a GPS mode would be foolish.
As for solar storms, if…"
