Gender
Male
About
Please tell us a bit about your UAV interest
Into Multicopter UAVs
Activity Feed
"If it carries a person.. is it a drone? Or a multi-rotor aircraft???? :-)"
"Very good info.. :-)
Thanks for all your efforts..
Willy is a very scary platform (he he) but great to watch!!!
Thanks heaps!!!"
Thanks for all your efforts..
Willy is a very scary platform (he he) but great to watch!!!
Thanks heaps!!!"
"Looks great. Very interested. Had a look at the video.. should the horizon be rotating in the opposite direction to stay in line with the horizon in the video? It seems to be rotating in the wrong direction."
"This will be great. I've just started reading thru the arduplane code.. want to learn the guts and how it all works.. hopefully in the future to assist with beta testing and more. :-)
Thanks Tridge."
Thanks Tridge."
"Bingo....
Thanks Chris... I did have a look at the RC3 max value at this was definitely wrong (was set to 1099) which was the maximum figure I was seeing.
Not sure what this was wrong. Had completed a radio cal previously but possibly stuffed up it…"
Thanks Chris... I did have a look at the RC3 max value at this was definitely wrong (was set to 1099) which was the maximum figure I was seeing.
Not sure what this was wrong. Had completed a radio cal previously but possibly stuffed up it…"
"Definitely agree to that. :)"
"Looks great. Tried the vid but 1st is not available and 2nd is private. :-("
"I had a look at the TRIM_THROTTLE figure. This is set to 45 or 50% which I is the approx. throttle input (half throttle stick) required for a cruise on the Talon. Im not sure how this feeds into the throttle control in FBWA.
Adrian"
Adrian"
"I believe I have calibrated the radio correctly.
The THR_PASS_STAB is disabled. It correctly does the pass thru if enabled.
I will have a look at the TRIM_THROTTLE figure.
Do you know how this affects the FBWA throttle?
Thanks
Adrian"
The THR_PASS_STAB is disabled. It correctly does the pass thru if enabled.
I will have a look at the TRIM_THROTTLE figure.
Do you know how this affects the FBWA throttle?
Thanks
Adrian"
Hi,Im currently working with ArduPlane 3.1.1 on an APM2.5 in a XUAV Talon.I was looking at doing some autotuning; however, I wanted to test the system in FBWA first.My understanding is that throttle control is manually controlled but bound by the…
"Not for at least 6 months.. lol.. or until you do something else.. hehe"
"All 8" props? Or 3 and a 9"? Lol... :-)"
"Hi,
This is the setup that I am going with..
http://diydrones.com/group/x-uav-talon/forum/topics/xuav-talon-mult...
I decided to go with a high cell count (6S) to reduce the current and a lower Kv motor.. this reduces the overall current load.
As…"
This is the setup that I am going with..
http://diydrones.com/group/x-uav-talon/forum/topics/xuav-talon-mult...
I decided to go with a high cell count (6S) to reduce the current and a lower Kv motor.. this reduces the overall current load.
As…"
"I also found the extension (available on their own) at
http://www.fpvstyle.com/item/The-extended-wing-for-X-UAV-Talon-Fpvs...
@Hugues.. did fpvmodel have them listed separately? or did you get the full upgrade pack?
Thanks"
http://www.fpvstyle.com/item/The-extended-wing-for-X-UAV-Talon-Fpvs...
@Hugues.. did fpvmodel have them listed separately? or did you get the full upgrade pack?
Thanks"
"Have a look here... :) Good result...
http://diydrones.com/profiles/blogs/diy-drones-teams-dominate-spark...
Adrian"
http://diydrones.com/profiles/blogs/diy-drones-teams-dominate-spark...
Adrian"
"@Not Sure....
I have been in conversation with CASA as well over the last couple of weeks too...
From my understanding, RPAs are for commercial gain (i.e. it is for a business or earning a profit).
Model aircraft are for hobbist. Refer to this…"
I have been in conversation with CASA as well over the last couple of weeks too...
From my understanding, RPAs are for commercial gain (i.e. it is for a business or earning a profit).
Model aircraft are for hobbist. Refer to this…"
