Gender
Male
About
Please tell us a bit about your UAV interest
I'm interrested in mini multikopter building.
Activity Feed
"What about using wankel motors instead of otto ones? Vibration levels would seriuosly decrease. Here are some samples in this size: http://www.barnardmicrosystems.com/UAV/engines/wankel.html"
"Great tutorial but next time please use rubber glowes when applying epoxy or other resins, at least on a demo video. Health and safety first... :)"
Hi,after finishing my last project, I'm ready for the next challenge.However, right now I can't afford to start another project and buy components for development, although I'd have ideas of course.So I'd like to offer my experiences in 3D…
Hi, since my last blog entry I made some more changes on my design. Key features:Video TX antenna is positioned at the end of the main body to improve signal strength during fast flightsGPS hollow in the top part is replaced by a Buzzer hollow (I'll…
Hi again, this is my custom designed tray for my Graupner MZ-24. My goal was to build a small tray that can be removed easy without any tools and small enough to be put next to my transmitter in my bag. I think I succeed... :)Suggested print…
Hi guys, let me introduce the final version of my 3D printed FPV racer. Since the last blog entry I made some further small modifications according to my experiences. All files can be downloaded from the project GrabCAD page.Since there is still…
"Diatone F3. The hole on the frame is for the external USB linker given for the Diatone FC."
Hi! After my successful first project a friend of mine asked me to modify my design for night flying with a built-in IR LED. We worked together on this way, and the result is quite promissing! Further details and test results can be found on his…
"Hi, of course, I'd be pleased.
Contact me by email on nhadrian@gmail.com for details and further support.
BTW now I'm practicing with HT-PLA, maybe it'll be strong enough to replace ABS but printing is much more easier.
Regards Adrian"
Contact me by email on nhadrian@gmail.com for details and further support.
BTW now I'm practicing with HT-PLA, maybe it'll be strong enough to replace ABS but printing is much more easier.
Regards Adrian"
"Hi, Solidworks."
"Please note that I did some small modifications around HS1177 housing, I updated the files on GrabCAD. If anybody interrested in building one, please download the updated files. Thanks."
"Hi, electronics are discribed in the first part of the blog, BeeRotor controller and PDB, 20A ESCs, 200 mW VTx, HS1177, etc. Of course frame can be modified for many more but I have really limited free time so I don't know when."
Hi all.Finally I received all parts so I assembled the first prototype of my 170 mm FPV racer design (see previous posts for details and STL files). All-up weight excluding battery and micro GPS is finally 286g. And HOTT telemetry totally works!!!…
"I'll not use compass! The gps is only for providing coordinates through telemetry in case I have to find the copter after a crash. Good catch anyway."
