Gender
Male
About
Location
Paris
About Me:
I'm a french aeronautics and space engineer.
Please tell us a bit about your UAV interest
I started an UAV project few months ago and my goal is to create a nice and strong airplane with a powerful embedded system to achieve various missions.
Hometown:
PARIS
Activity Feed
Hi everyone, I'm working on the BreezeUav project which is open-source autopilot for fixed-wing and multicopter. So far it's possible to fly by using the board we designed based on Atmega 2560 and we currently adapt the code to be executed on ARM…
"Like I said your P value is too high try something like : 2"
"I fand a solution by using a potentiometer on the Futaba radio to tune the PID controller. That way I fand good values."
"I guess your P parameter is too high.Very funny project by the way !"
Hi everyone,I have looked the arducopter and multiwii codes but I can't find this information : how much amplitude you give to attitude control using the motors. I mean : if your motor signal (motor_1) goes from 1000 to 2000, and you have an…
Hi everyone,I build a project called Breeze which aims to develop an autopilot for UAV. Few months ago I change the code a bit to adapt the board to a quadcopter.My problem is that I have so far 3 identical motors and one other with a higher Kv and…
"Very interesting plane, i like bi-motors actually, what's the weight of this plane ?"
"Wonderful job,
do you have information about power consumption of such device ?
Best regards,
Adrien"
do you have information about power consumption of such device ?
Best regards,
Adrien"
"Hi,
I build the BreezeUAV project without radio system and now that the project become good enough to fly, I regret it.
Firstable XBee are great, but sometime the communication is lost and my failsafe capability is not good enough.Secondly, it's…"
I build the BreezeUAV project without radio system and now that the project become good enough to fly, I regret it.
Firstable XBee are great, but sometime the communication is lost and my failsafe capability is not good enough.Secondly, it's…"
"Hi,
It's a very interesting project, firstable because such processor is more powerful than Atmega 2560.You said that it's possible to download sketch to produce our own board, I didn't find the link on your website ?Thanks a lot"
It's a very interesting project, firstable because such processor is more powerful than Atmega 2560.You said that it's possible to download sketch to produce our own board, I didn't find the link on your website ?Thanks a lot"
"Thanks for your answers, maybe Cz = 1.0 is too strong for this model."
"Whaoo such a nice work ! It makes me think of the professionnal work of uavfactory : http://www.uavfactory.com/shopcatpics/sci_64_1326030891_big.jpg"
Hello everyone,I'm looking for X-8 users, Skywalker X-8, more than 2m wingpsan, I wanted to know if you have data about the minimum speed you were able to glide or stall speed. I read somewhere that the speed range is 55 to 110 kmh, but I find it…
"Hi,
Firstable very nice work ! It's a nice GUI with a lot features but it seems easy to use.
Can I ask from which sources the maps come from ? Can we use the ground station even offline and still have the tiles ?"
Firstable very nice work ! It's a nice GUI with a lot features but it seems easy to use.
Can I ask from which sources the maps come from ? Can we use the ground station even offline and still have the tiles ?"
Hi everyone,Today I made a new flight using the BreezeUAV autopilot that I develop in open-source (breezeuav.com) :It ended up with a crash due to motor vibrations leading to wrong roll evaluation. Actually I was aware of those vibrations, I thought…
"Thanks you for your comments.
About the Xbee868 I didn't know that there was a duty cycle. This is not great at all ! Actually I will maybe use two way of communication for safety and different use. 2.4Ghz for high data rate, and 868 low long…"
About the Xbee868 I didn't know that there was a duty cycle. This is not great at all ! Actually I will maybe use two way of communication for safety and different use. 2.4Ghz for high data rate, and 868 low long…"
