About

Gender

Male


About Me:

Embedded system engineer


Please tell us a bit about your UAV interest

designing a landmine detection AV


Activity Feed

Ahmed Hassan replied to Muthanna Alwahash's discussion No signal on APM2.0 UART0 and XBEE issue
"OK, after i was able to establish a link via the hardwired UART0 port, now i just can't. I wonder WHY. it was able to fetch parameters then eventually fail due to (link isn't fast enogh), but i thought it would work using full battery and ESC…"
Aug 16, 2012
Ahmed Hassan commented on Martint BuildYourOwnDrone.co.uk's blog post ArduPilot Mega & Arducopter 2.4 GHz Telemetry Kit for UK & EU
"try reprogramming the module/ updating the modem via X-CTU. "
Aug 13, 2012
Ahmed Hassan commented on Martint BuildYourOwnDrone.co.uk's blog post ArduPilot Mega & Arducopter 2.4 GHz Telemetry Kit for UK & EU
"OK, I found it thanx to Vernon Barry. I used the UART0 port not the telemetry port and it worked. the MUX must have come without solder !!!"
Aug 12, 2012
Ahmed Hassan commented on Martint BuildYourOwnDrone.co.uk's blog post ArduPilot Mega & Arducopter 2.4 GHz Telemetry Kit for UK & EU
"two days and no reply ? COME ON, PEOPLE; HELP !!"
Aug 12, 2012
Ahmed Hassan commented on Martint BuildYourOwnDrone.co.uk's blog post ArduPilot Mega & Arducopter 2.4 GHz Telemetry Kit for UK & EU
"Ok, guys, I need URGENT help, please.
I got APM2.0 a week ago along with 2 XBEE Pro S28 modules and USB-XBEE Adaptor http://store.fut-electronics.com/Zig-11SHD006.html
I configured the modules as router and coordinator with baud-rates 57600 and with…"
Aug 10, 2012