Gender
Male
About
Location
kolkata , West Bengal
About Me:
Software Eng
Please tell us a bit about your UAV interest
Hobby
Hometown:
Kolkata
Activity Feed
"Hey guys thanks for your replies .... i am sorry for my long absence,
I needed the throttle to be around 40% for the car to start moving .
as David Mathias i also faced the same problem of over speed ,
Lowering the throttle slew rate as Ray…"
I needed the throttle to be around 40% for the car to start moving .
as David Mathias i also faced the same problem of over speed ,
Lowering the throttle slew rate as Ray…"
Simple Goto is working for the SITL only But not for the Actual Rover.. Cruise Speed is set at 2 m/s and Throttle is at 20 % can you say what can be the issue. Thanks
"Simple Goto is working for the SITL only But not for the Actual Rover..
Cruise Speed is set at 2 m/s and
Throttle is at 20 % can you say what can be the issue. "
Cruise Speed is set at 2 m/s and
Throttle is at 20 % can you say what can be the issue. "
Hey , I am trying to control my Rover with a Companion Computer ( Raspberry Pi). I have installed DroneKit Python on the Pi, The commands works fine for a Copter as most of the tutorial says. but they do not work for Rover. The Raspberry Pi is…
Hi,i am trying to connect raspberry pi b to my pixhawk at telem 2 port with the GPIO pins of the raspberry pi as shown inhttp://dev.ardupilot.com/wiki/raspberry-pi-via-mavlink/ post.i have also changed the pixhawk parameters as…
