Gender
Male
About
Location
Republika e Kosoves
About Me:
I'm an electrical Engineer in field of computers and telecommunication who loves RC flying. Hope to grow this beautiful hobby even bigger all together.
Please tell us a bit about your UAV interest
I'm pretty new in UAV and it is a field that makes the hobby even more beautiful and fun. There is a lot of new things developing every day that will keep us working and exploring further with the each-other's help. I will share my experience with the community here and I'm confident that I will get help anytime I need about this beautiful hobby.
Hometown:
Prizren
Activity Feed
"Try following:
1. Download this and extract on desktop (This is release 820 there may be newer releases so check the rcgroups page for updates, link on the bottom)
2. Connect FTDI to your MinimOSD and make sure the FTDI is outputing 5V (I have…"
1. Download this and extract on desktop (This is release 820 there may be newer releases so check the rcgroups page for updates, link on the bottom)
2. Connect FTDI to your MinimOSD and make sure the FTDI is outputing 5V (I have…"
"My setup: Using 4 panels. first one with most info, second one less, third one no info at all (only the view), fourth panel with summary. I'm using custom charset i did myself (kind of digital charset)."
"I've been using that MinimOSD as well. A lot of new features. I really like it :). "
"The dot must be from the vertical speed indicator i think (you can delete it in the charset). According to the pitch, check on MinimOSD CT if you have overlapped layers, move them around to make sure you don't have two information gauges over…"
"To use the rotation screen feature you need to use the Trainer Switch."
"I just checked the site from my PC, there is no such a problem. If you are browsing from a smartphone maybe you are clicking the "scroll up" button accidentally. If you are having the problem from PC please let me know what browser are you using. I…"
"I suggest:
- Download Arduino IDE (if you don't have it)
- Download EEPROM Clear and flash to your APM (don't forget to choose Board: 2560 and the right com port)
- Install APM firmware from the beginning and try again.
Before you do all the…"
- Download Arduino IDE (if you don't have it)
- Download EEPROM Clear and flash to your APM (don't forget to choose Board: 2560 and the right com port)
- Install APM firmware from the beginning and try again.
Before you do all the…"
"Just to clarify:
The MinimOSD extra firmware that you get from my website has the baudrate set to 19200. To use that you need to set the SERIAL1_BAUD to 19 on mission planner and set the other sr0 and sr1 parameters as recommended in minimosd extra…"
The MinimOSD extra firmware that you get from my website has the baudrate set to 19200. To use that you need to set the SERIAL1_BAUD to 19 on mission planner and set the other sr0 and sr1 parameters as recommended in minimosd extra…"
"Try to flash the r719 to the working one, and the r805 to the non-working one. This way you will know if the r719 minimosd is broken. (Did you check the wires?)"
"Hi there Marc Merlin
Thank you for your nice words. The reason i created the website was the problem finding all the mods i needed in one place. So i thought it was a good idea to document the work as i go along. Because i haven't actually changed…"
Thank you for your nice words. The reason i created the website was the problem finding all the mods i needed in one place. So i thought it was a good idea to document the work as i go along. Because i haven't actually changed…"
"Check the cable. If you have another apm, try flashing the minimosd with normal firmware (5700) and see if it's working."
"It is my website hosted on weebly and the domain from dot.tk I think dot.tk domains are blocked from some antiviruses and even from sharing it on facebook. The website is clear ;)"
"What radio and what tx/rx module do you have. Try to erase the eprom from your minimosd, burn the bootloader and flash again with the 19200 baudrate firmware version from the website and see if this solves the problem. "
