the pixhawk is on the market from a year , you know if there are plan in the short period to update the hardware card ?if yes do you have a roadmap in this sense ?do you plan to increase the number of channel for example to 18 or 24 or insert a…
"Ciao a tutti è bello poter comunicare con altri appassionati italiani dell ardupilot. Io attualmente preferisco gli aerei per ora . Non sono un esperto di elettronica ne di programmazione (riesco a mettere insieme ogni tanto qualche parola di C) …"
"if i remeber well the maximum data rate for a serial port is 115 kbps, so c.a. 11 KB/S the problem then is the comunication between xbee and serial port of APM, it's really cool if in the next version of Arduino (based on Cortex arch)the team …"
Hi all,I have try to use the joystick to control my APM 1.4 (2.28) the joystick work fine in simulation in Xplane but if i try to use on real i have several Issue :1) the joystick center is not the same of the 0 radio center so when the joystick…
The new board introduced in the last month (first Phone Board) and then Ardupilot Mega 2, will think to me that in the course of next year more improvment will do .1) I ask to me if you have planned to do a DiyDrones OSD instead to use Remzibi…
"anks guys for the expalnation.
So if i undestand correctly i have to found a way to mesurate the exact airspeed of the airplane to found the exact value of this ratio for a data Velocity Vx .
a possibility is to calculate the Airspees by tree pitot…"
I have try the latest version of APM Planner and i have notice that with this particular version in th HIL the APM did not take the Heading that Xplane send . I will a roll back of version .88 and the HIL mode work correctly .
"I UT thanks for explain me .
I have a question .
I have seen that ardupilot mega have a good IMU and good processor power and i am ask myself why people whant to port apm on smartphone when APM is a very good platform (and i think if we wait some…"
can you show some connection schema to the apm ?
I haven't understand if is possible to connect this board to the apm and use as cellular link instad of xbee connections . Most probably i havent understand the "destination use" of…"
Hi, all I have do some test with the Apm Planner and I have seen that My airpressure sensor repsond with different value on consecutive test (+- 10 MT).It is normal ? It's possibile to calibrate the sensor ? if the sensor is broken can I raplace…
"I will think to use a different Module That is positioned Between the Reciver radio , The APM and the Servo
this Module check the consistency of the data transmitted by the receivers to the APM and simultaneously check the consistency of data…"
Hi all, ardupilot in recent months has had many updates, but I wonder if there are any planned developments to implement the high availability (through the use of two or three Ardupilot in active-active or Active-Stanby configuration) and a new…